Two Deck Drag Conveyors

By: Mitchell Mill Systems  09-12-2011
Keywords: Stainless Steel, Stainless Steel Fabrication, Mild Steel


Capacities: Up to 150M.T.P.H. at 95% conveyor loading. 
Capacities are based on material density at 45#/ cu.ft. or 721 kg/m3. 
Heavy duty totally enclosed take up units ensure that the chain stays tight.
Direct coupled gearbox, chain and sprocket and “V?belt drive systems are available. 
Heavy duty construction , mild steel or stainless steel fabrication. 
Optional curved section supplied to transfer product from horizontal to vertical. 
Multiple outlets are available using our flush mounted slide gate. Low profile design. 
Flood or controlled feeding capability. Excellent cleanout.

Warning:

Explosion venting may be required depending on location and / or product being transferred through this equipment.
To operate without proper explosion venting may result in fire or explosion. check local industrial codes and policies.

MODEL

SPEED

PADDLE

SIZE

CAPACITY / HR.

FPM

M / SEC.

RPM

CU.FT.

CU.M.

M.T.P.H.

12410

100
125
150

0.5
0.6
0.8

45
56
68

12″x 4″
300 x 100

2000
2475
2970

57
70
84

40
50
60

15410

100
125
150

0.5
0.6
0.8

45
56
68

15″x 4″
380 x 100

2496
3120
3744

71
88
106

50
63
76

18510

100
125
150

0.5
0.6
0.8

45
56
68

18″x 5″
450 x 125

3750
4687
5625

106
133
159

77
96
115

20610

100
125
150

0.5
0.6
0.8

45
56
68

20″x 6″
500 x 150

4998
6248
7947

142
177
212

102
127
153

Keywords: Chain And Sprocket, Explosion Venting, Heavy Duty Construction, Industrial Codes, Material Density, Mild Steel, Stainless Steel, Stainless Steel Fabrication,

Other products and services from Mitchell Mill Systems

09-12-2011

Bucket Elevators

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that belt stays tight and runs straight. Pillow block bearings for head section and flange style bearings for boot sections. Optional self cleaning boot section to ensure no cross contamination.


09-12-2011

Square Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication.


09-12-2011

Ultramax Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. No carryover of free flowing dry product when used to fill multiple bin systems and when operated in the ultra clean mode.Superior capactity when used at Maximum fill capability.


09-12-2011

Round Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication. Sizes: from 225mm to 450mm.


09-12-2011

Screw Feeders

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Screw feeders are installed under bins or under a full head of product surge resulting in 95% loading. The fighting in the inlet of a screw feeder is multiple pitch or tapered flights (customers choice). Capacity: Up to 560 M.T.P.H.at 95% conveyor loading.