Screw Feeders

By: Mitchell Mill Systems  09-12-2011
Keywords: Stainless Steel, Stainless Steel Fabrication, Mild Steel

Screw Feeders


Screw feeders are installed under bins or under a full head of product surge resulting in 95% loading. 
The fighting in the inlet of a screw feeder is multiple pitch or tapered flights (customers choice). 
Sizes: from 150mm to 600mm. 
Capacity: Up to 560 M.T.P.H.at 95% conveyor loading. 
Capacities are based on material density of 45#/ cu.ft. or 721kg / m3.
Direct coupled gearbox or chain and sprocket ,“V?belt drive systems are available. 
Heavy duty construction, mild steel or stainless steel fabrication. 
Excellent metering qualities for batching and Maximum incline ability. 
Capital cost effective, low maintenance.

Warning:

Explosion venting may be required depending on location and / or product being transferred through this equipment.
To operate without proper explosion venting may result in fire or explosion. check local industrial codes and policies.

MODEL

SPEED
(RPM)

SINGLE SCREW FEEDER

TWIN SCREW FEEDER

CAPACITY / HR.

CAPACITY / HR.

CU.FT.

CU.M.

M.T.P.H.

CU.FT.

CU.M.

M.T.P.H.

6 (150 )

75

353

10

7.2

100

471

13.3

9.6

9 (225)

75

1150

32

24

2500

70

55

100

1500

42

30

3300

93

73

12 (300)

75

2600

73

53

5900

165

120

100

3600

102

73

7800

221

160

14 (350)

75

4400

124

90

6800

190

138

100

6000

170

122

9000

255

184

16 (400)

60

5500

155

112

80

6550

185

133

18 (450)

60

7550

214

154

80

10000

283

204

20 (500)

60

11724

332

239

80

15609

442

318

24 (600)

60

20659

585

421

80

27545

780

562

Keywords: Chain And Sprocket, Explosion Venting, Industrial Codes, Material Density, Mild Steel, Screw Feeders, Stainless Steel, Stainless Steel Fabrication,

Other products and services from Mitchell Mill Systems

09-12-2011

Two Deck Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that the chain stays tight.Direct coupled gearbox, chain and sprocket and “V?belt drive systems are available. Optional curved section supplied to transfer product from horizontal to vertical.


09-12-2011

Bucket Elevators

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that belt stays tight and runs straight. Pillow block bearings for head section and flange style bearings for boot sections. Optional self cleaning boot section to ensure no cross contamination.


09-12-2011

Square Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication.


09-12-2011

Ultramax Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. No carryover of free flowing dry product when used to fill multiple bin systems and when operated in the ultra clean mode.Superior capactity when used at Maximum fill capability.


09-12-2011

Round Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication. Sizes: from 225mm to 450mm.