Bucket Elevators

By: Mitchell Mill Systems  09-12-2011
Keywords: Stainless Steel, Heavy Duty Construction, Pillow Block

Capacities: Up to 280 M.T.P.H. at 75% loading. Smaller and larger capacities are available. 
Capacities are based on material density of 45#/ cu.ft. or 721 kg/m3. 
Heavy duty construction of components minimizes the need for external stiffeners. 
Pillow block bearings for head section and flange style bearings for boot sections. 
Heavy duty totally enclosed take up units ensure that belt stays tight and runs straight. 
-These take up units can be manual, pneumatic, hydraulic or gravity. 
Oversize inspection doors on the upside of the elevator leg casing. 
Optional self cleaning boot section to ensure no cross contamination. 
Direct coupled gearbox, chain and sprocket and “V" belt drive systems are available. 
Mild, electroplated galvanized and stainless steel fabrication.

Warning:

Explosion venting may be required depending on location and / or product being transferred through this equipment.
To operate without proper explosion venting may result in fire or explosion. check local industrial codes and policies.

MODEL

SPEED

CUP SIZE

CUP
SPACING

CAPACITY / HR.

FPM

M / SEC.

RPM

CU.FT.

CU.M.

(M.T.P.H.)

7520 20TPH
STANDARD

313

1.6

60

DS1612
160x120 (7x4)

6" 150mm

1095

31

22

7520 30TPH
STANDARD

DS1814
189x140 (7x5)

1660

47

34

7520 40TPH
LOWPROFILE

356

1.8

68

DQ1814
186 x140 (7x4)

4" 100mm

1907

54

39

7520 50TPH
LOWPROFILE

DQ1914
190x145 (7×5)

5" 125mm

2189

62

45

11624 60TPH
STANDARD

364

1.8

58

DS2814
280x140 (11x5)

7" 175mm

2648

75

54

11624 70TPH
STANDARD

DS3114
312x147 (12x5)

3178

90

65

11624 80TPH
LOW PROFILE

427

2.2

68

DS2814
280x140 (11x5)

6" 150mm

3602

102

74

11624 90TPH
LOW PROFILE

DS3114
312x147 (12x5)

4308

122

88

14736 100TPH
STANDARD

451

2.3

48

DS3118
315x190 (12x7)

9" 225mm

4944

140

101

14736 120TPH
STANDARD

DS3518
358x190 (14x7)

6392

181

131

14736 140TPH
LOW PROFILE

547

2.8

58

DS3118
315x190 (12x7)

8" 200mm

6745

191

138

14736 160TPH
LOW PROFILE

DS3518
358x190 (14x7)

9" 225mm

7734

219

158

14736 180TPH
LOW PROFILE

DS3518
358x190 (14x7)

8" 200mm

8687

246

178

14736 200TPH
LOW PROFILE

630

3.2

66

DS3518
358x190 (14x7)

8" 200mm

10029

284

205

14748 220TPH
STANDARD

748

3.8

60

DS3518
358 x190 (14x7)

9"225mm

10770

305

220

14748 240TPH
LOW PROFILE

748

3.8

60

DS3518
358x190 (14x7)

8"200mm

11760

333

240

18848 260TPH
STANDARD

610

3.1

49

DS4621
460x220 (18x8)

10"250mm

12713

360

260

18848 280TPH
LOW PROFILE

650

3.3

52

DS4621
460x220 (18x8)

10"225mm

13700

388

280

Keywords: Belt Drive, Belt Drive Systems, Chain And Sprocket, Explosion Venting, Heavy Duty Construction, Industrial Codes, Material Density, Pillow Block, Stainless Steel,

Other products and services from Mitchell Mill Systems

09-12-2011

Two Deck Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Heavy duty totally enclosed take up units ensure that the chain stays tight.Direct coupled gearbox, chain and sprocket and “V?belt drive systems are available. Optional curved section supplied to transfer product from horizontal to vertical.


09-12-2011

Square Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication.


09-12-2011

Ultramax Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. No carryover of free flowing dry product when used to fill multiple bin systems and when operated in the ultra clean mode.Superior capactity when used at Maximum fill capability.


09-12-2011

Round Drag Conveyors

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Direct coupled gearbox, chain and sprocket, “V?belt drive systems are available. Heavy duty totally enclosed take up units ensure that the chain stays tight. Mild steel or stainless steel fabrication. Sizes: from 225mm to 450mm.


09-12-2011

Screw Feeders

Explosion venting may be required depending on location and / or product being transferred through this equipment.To operate without proper explosion venting may result in fire or explosion. Screw feeders are installed under bins or under a full head of product surge resulting in 95% loading. The fighting in the inlet of a screw feeder is multiple pitch or tapered flights (customers choice). Capacity: Up to 560 M.T.P.H.at 95% conveyor loading.