TruckStop Controller

By: Truckstop  09-12-2011
Keywords: Electrician, lift truck, Truckstop

The TruckStop TM Express Controller can store the ID numbers of up to 100 Driver Keys, and a history file of the last 100 events that took place on the lift truck. All information is stored in this non-volatile controller.

Engine Specifications

TruckStop TM Express is compatible with both internal combustion and electric engines. Refer to the lift truck's specifications. You will need to know the type of engine, wiring diagrams, and any associated information. Wiring information for internal combustion and electric engines can be found in the Controller Wiring section.

Battery Specifications

TruckStop TM Express was designed to work in vehicles with a battery in the range of 12 VDC to 48 VDC.  Before installation, verify the voltage of the battery on the lift to make sure it meets TruckStop TM Express specifications.  To avoid damaging the electrical system during the installation, disconnect the negative ( - ) battery terminal before you begin the installation.


Securely mount the back-box/reader in an easily accessible location. Install the controller in a suitable location that will not obstruct operation of the lift truck. Do not obstruct either of the following:

  • mechanical operation of the lift
  • lift truck controls


Route all wires so that they will not come in contact with any moving, sharp, or protruding parts and/or areas of high temperature. Extra precaution must be taken in these instances. Secure all wires with cable clamps, cable ties or adhesive tape.


You cannot connect TruckStop TM Express directly to an AC (alternating current) source.  In the instance where you are connecting TruckStop TM Express to AC controlled stationary equipment, the installation must be done by a licensed electrician who will determine what additional electrical equipment is required.

Keywords: Electrician, lift truck, Truckstop

Contact Truckstop

Email - none provided

Print this page

Other products and services from Truckstop


TruckStop Readers

The TruckStop TM Express Proximity Reader Add On Kit comes in mullion and wall mount. The iButton reader is constructed of polycarbonate. Operating Temperature -40?C to 70?C.


TruckStop Credentials

Made of a hermetically sealed, stainless steel disk mounted on an anodized aluminum tab, the virtually indestructible keyfob is simply placed against the ergonomically designed read head for quick access notification. The clamshell proximity card is available in AWID 37-bit wiegand for use with the CA-TSXPR TruckStop TM Express Proximity Reader Add On Kit. The iButton key is the sole access credential for the TruckStop TM iButton touch reader.



A revolutionary new fleet management system which prevents unauthorized personnel from using lift trucks, service vehicles and other equipment where use must be restricted. The system consists of an access key reader, operator access keys, a truck control unit, TruckStop TM Express software and programming key and adapter.


TruckStop Software

The programming kit is also used to retrieve the transaction history file from the controller for display, printing and archiving at the PC. TruckStop TM Software is Windows compatible and is used for programming Driver Keys as well as tracking usage through reports. You may extract and view this data at any time by using TruckStop TM Software and a programming kit.