Magnetic Flux Leakage (MFL) - Assessing Metallic Pipelines

By: Pure Technologies  09-12-2011
Keywords: Pipelines, Potable Water, Nondestructive Testing

Magnetic flux leakage (MFL) is an electromagnetic method of nondestructive testing that is used to detect corrosion, pitting and wall loss in lined and unlined metallic pipelines



  • Potable Water
  • Raw Water
  • Wastewater
  • Oil & Gas

Pipe Materials

Pipe Diameters

8" (200mm) and larger

Case Studies

The most accurate method of metallic pipeline condition assessment is MFL in-line inspection (ILI) using advanced nondestructive electromagnetic methods to scan the full circumference and length of the pipeline for damage by corrosion and other causes.

This technology, commonly known as ‘smart pigging’, has become the industry standard condition assessment vehicle in unlined steel pipelines in the oil and gas industry.

Until now, the presence of mortar lining in water pipelines has limited the accuracy and use of ILI inspection and hindered development of practical ILI methods for large diameter, mortar-lined metallic pipelines. With MFL from Pure, pipeline owners can now clearly see through mortar linings up to an inch thick.

What is MFL?

With MFL technology, permanent magnets are used to temporarily magnetize the steel pipe and the magnetic field changes are recorded and analyzed. The magnetic flux is uniform if there are no flaws in the wall of the pipe. If internal or external flaws are present, such as pitting, corrosion or other forms of damage, the magnetic flux is distorted beyond the wall of the pipe, and this distortion or ‘leakage’ is measured by Hall Effect sensors.

See Through Lined Pipes

Pure's MFL tools inspect lined pipe through liner up to an inch thick. These tools have industry-leading computational capacity and speed, world-leading inspection resolution of the pipe wall and unique data analysis algorithms using advanced applied mathematics to accurately determine defect characteristics and shape.

Extra High Resolution (XHR)

Our MFL tools use Extra High Resolution (XHR) data in order to provide a visibly improved view of defects and better analytical characterization of their size. XHR is the newest generation of MFL tools where systems have a very high number of sensors. Hall Effect sensors are positioned at 1/4" (6.25mm) intervals along the circumference of the tool, and in conjunction with higher sampling rates, guarantee maximum data resolution.

Extra High Resolution (XHR) MFL means:

  • Better magnets and better sensors
  • Tighter sensor spacing for maximum resolution
  • Uniform sensor spacing on the entire circumference
  • Higher sampling rates for the best quality data

Featured Project

San Francisco Public Utilities Commission (SFPUC) operates three parallel cement mortar-lined steel pipelines 47.5 miles long, otherwise known as the San Joaquin Pipelines, which range in size from 56- to 78-inches in diameter. In 2008, the SFPUC contracted Pure Technologies to perform the in-line "smart pigging" inspection of the lines utilizing advanced MFL technology.

Benefits of Pure MFL

  • Provides high resolution data of entire circumference of the pipe wall allowing for comprehensive structural evaluations of the pipe
  • MFL tool is capable of collecting high resolution data through interior mortar linings
  • Recognized as an industry standard for metallic pipe wall assessment
  • May be deployed manned or free-swimming

Available Tools

Pure offers a wide variety of MFL tools for assessing the condition of metallic pipelines. These range from large diameter manned entry tools to free-swimming small diameter tools. Contact your Pure representative to find out which solution is best for your needs.

Keywords: Condition Assessment, Nondestructive Testing, Pipelines, Potable Water

Other products and services from Pure Technologies


Robotic Pipeline Inspection | Robotics

Capable of performing multi-sensor inspections in dry pipe or while submerged, the PureRobotics pipeline inspection system has a range of up to 3 miles from a single access point. PureRobotics uses powerful modular robotic pipeline inspection systems that can be configured to inspect virtually any pipe application 12-inches and larger.


Electromagnetic Testing of Pipelines

Electromagnetic Testing is a form of nondestructive testing for pipelines that uses the process of inducing electric currents / magnetic fields either inside or on the surface of a pipeline to measure an electromagnetic response. Electromagnetic testing provides the best condition assessment data for large diameter metallic and concrete pressure pipelines.


Structural Monitoring for Buildings & Structures

SoundPrint® is a patented innovative monitoring technology that can detect and locate failures in high-strength steel wire, strand or cable through continuous, non-intrusive remote monitoring. This provides managers with desktop access to a single-source, reliable service for all instrumentation requirements, providing information where it's needed, when it’s needed.


PipeDiver | Free-Swimming Electromagnetic Pipeline Inspection

Once inside the line, PipeDiver™ will travel with the flow of the water until it reaches a predetermined extraction point which could also be a hot tap connection and insertion sleeve, existing access, open chamber or resevoir. Its flexible design ensures that PipeDiver™ can easily navigate butterfly valves and bends in the pipeline, while travelling long distances.