ENGINEERING.com CATIA Education Centre - DELMIA

By: Engineering Catia Education Centre  09-12-2011
Keywords: catalog

Enhancements in V5R18 deliver a seamless end-to-end final assembly process planning solution and further developments delivered in V5R18 extend the production-ready solutions for the automotive body-in-white domain.

Expanding partnerships deliver powerful solutions for robotic painting and predictive weld cable deformation built on DS V5 technology. The release announces the availability of DELMIA 3DLive Shopfloor Review, an easy-to-use shop floor work instruction viewer based on DS's 3DLive technology.

Production System Simulation (PSS) DELMIA Production System Simulation (PSS) provides dynamic simulation-based evaluation and improvement of manufacturing process and material flow.

Electrical Harness Process Simulation (EHS) DELMIA Electrical Harness Process Simulation (EHS) provides tools to support wiring harness installation and maintenance verification in the 3D V5 environment.

Multi-Slide Lathe Machining (MML) DELMIA Multi-Slide Lathe Machining (MML) is a new generation tool that enables NC programmers to leverage the productivity of multi-slide lathe machining centers with multiple turrets and spindles.

Human Preferred Angles Catalog (MAC) DELMIA Human Preferred Angles Catalog (MAC) provides users with a set of preferred angles that are connected to the comfort and strength of some actions.

Human Task Catalog (MHC) DELMIA Human Task Catalog (MHC) provides users with a set of tasks and task transitions with common postures. Includes process information for seamless transitions from common postures such as sitting to standing, standing to kneeling, ingress/egress.

Human Anthropometry Catalog (MTC) DELMIA Human Anthropometry Catalog (MTC) provides users with a set of manikins based on anthropometry database to accommodate and optimize products for different population segments.

Human Posture Catalog (MPC) DELMIA Human Posture Catalog (MPC) provides users with two sets of catalogs containing more than 350 postures for both static and grasping postures.

Enhancements in V5R18 deliver a seamless end-to-end final assembly process planning solution and further developments delivered in V5R18 extend the production-ready solutions for the automotive body-in-white domain.

Expanding partnerships deliver powerful solutions for robotic painting and predictive weld cable deformation built on DS V5 technology. The release announces the availability of DELMIA 3DLive Shopfloor Review, an easy-to-use shop floor work instruction viewer based on DS's 3DLive technology.

Production System Simulation (PSS) DELMIA Production System Simulation (PSS) provides dynamic simulation-based evaluation and improvement of manufacturing process and material flow.

Electrical Harness Process Simulation (EHS) DELMIA Electrical Harness Process Simulation (EHS) provides tools to support wiring harness installation and maintenance verification in the 3D V5 environment.

Multi-Slide Lathe Machining (MML) DELMIA Multi-Slide Lathe Machining (MML) is a new generation tool that enables NC programmers to leverage the productivity of multi-slide lathe machining centers with multiple turrets and spindles.

Human Preferred Angles Catalog (MAC) DELMIA Human Preferred Angles Catalog (MAC) provides users with a set of preferred angles that are connected to the comfort and strength of some actions.

Human Task Catalog (MHC) DELMIA Human Task Catalog (MHC) provides users with a set of tasks and task transitions with common postures. Includes process information for seamless transitions from common postures such as sitting to standing, standing to kneeling, ingress/egress.

Human Anthropometry Catalog (MTC) DELMIA Human Anthropometry Catalog (MTC) provides users with a set of manikins based on anthropometry database to accommodate and optimize products for different population segments.

Human Posture Catalog (MPC) DELMIA Human Posture Catalog (MPC) provides users with two sets of catalogs containing more than 350 postures for both static and grasping postures.

Keywords: catalog

Contact Engineering Catia Education Centre

Email

Print this page

Other products and services from Engineering Catia Education Centre

09-12-2011

ENGINEERING.com CATIA Education Centre - Textbooks

In addition to the Wichita State textbooks, CATIAStudent.com also offers a two book set for high school specific courses and project based learning, created by Re-Engineering Australia and F1 in Schools. The books cover the process of designing models with CATIA V5 from conceptual sketching, through to solid modeling, assembly design, and drawing production.


09-12-2011

ENGINEERING.com CATIA Education Centre - User Companion

After an introduction to the Generative Assembly Structural Analysis workbench, the companion explains in a first lesson the different types of connection technologies that can be defined between parts in an assembly. Besides many skillets and job aids adapted to the products of this configuration, the User Companion for Hybrid Design provides several sets of prepackaged and update courses.


09-12-2011

ENGINEERING.com CATIA Education Centre - CATIA V5

CATIA V5 is industry agnostic with users ranging from aerospace, automotive, and industrial machinery, to electronics, shipbuilding, plant design, and consumer goods, even architecture. It means that students who learn with CATIA V5 are developing a skill set that is highly prized by companies that employ engineers, designers and CAD operators.


09-12-2011

ENGINEERING.com CATIA Education Centre - Curriculum

Incorporating the available Dassault Systemes developed training tools with ENGINEERING.com’s exclusive textbooks, educational instructors can quickly and easily develop or expand upon their own knowledge and skills. These tools can also be used by instructors to develop a comprehensive curriculum to provide their students the knowledge and experience that today’s leading industry and employers need and desire.


09-12-2011

ENGINEERING.com CATIA Education Centre - LLM for High Schools

Increasingly, post secondary schools are matching leading employers such as Boeing, Bombardier, Black and Decker, and Toyota in selecting the tools they use for technical education. Ask them if it would help graduate acceptances to the school if you provided them with students who have advanced design and manufacturing software experience.