Dynapole: order checklist

By: Dynapole  09-12-2011
Keywords: Poles, Anchor Bolts

Your satisfaction is important. Taking a few minutes to plan your order before placing it will considerably speed its delivery, and help to ensure that your poles and accessories will meet the requirements of the job site.

Because light fixtures have widely varying mounting requirements, each pole is custom-made to receive the fixture you will be using, and so we need to have the following information before production can begin.

  1. Complete catalogue number
    • Please use the codes that are found throughout these pages
  2. Finish
    • Prime painted, galvanized, or polyester
  3. Colour (if polyester finish)
    • Standard colours are black and bronze
    • Hundreds of special colours may be supplied (for a surcharge) if you provide the RAL colour number--an international, standard code that allows you to avoid the otherwise expensive process of custom-matching an existing colour
  4. Fixture mounting details
    • Tenon or drilling(s)
      • Indicate the model and manufacturer of the fixture to be mounted, so that we may supply a tenon or drilling pattern that will match your fixture
      • If more than one drilling is required, indicate their positions with respect to each other, e.g., , or (see our )
  5. Complete shipping address
    • Freight allowed in Toronto (with a minimum of 5 poles)
    • Preshipment of anchor bolts is freight extra
    • All other freight is extra; please specify prepaid & charge on your purchase order

Keywords: Anchor Bolts, Poles

Contact Dynapole

Email - none provided

Print this page

Other products and services from Dynapole


Dynapole: installation guide

After curing, place the leveling nuts on the anchor bolts and screw to the bottom. Install the anchor bolts using template, with conduit, through the centre. Lower the pole onto the anchors using nylon slings. Install washers on the top of the baseplate.


Dynapole: specifications & standard features

All poles include a provision for one fixture: your choice of a tenon or single drilling; please specify the requirements of your fixture when ordering. Base mounted poles include galvanized steel anchor bolts, base cover, and one template per order; traffic poles are less anchor bolts. Many options and extras are available, and customizations will be gladly accommodated; please contact Dynapole with your requirements.


Dynapole: Measuring existing anchor bolts

If a replacement pole is required to suit an existing foundation, the base plate of the pole must be made to match the existing anchor bolts. The size and layout of anchor bolts can vary considerably; unfortunately, there is no "standard" size. Either the BCD or BSD of the 4 existing anchor bolts. Diameter of existing anchor bolts.


Dynapole: terms & conditions

Title and risk of all goods pass to purchaser when the contract is made or when the goods are loaded for transportation to the purchaser, whichever is sooner, but Dynapole reserves the right to retain or resume possession until the purchase price is paid in full.