Dynapole: Measuring existing anchor bolts

By: Dynapole  09-12-2011
Keywords: Anchor Bolts

If a replacement pole is required to suit an existing foundation, the base plate of the pole must be made to match the existing anchor bolts. The size and layout of anchor bolts can vary considerably; unfortunately, there is no "standard" size.

When ordering a replacement pole, please indicate:

  • diameter of existing anchor bolts
  • either the BCD or BSD of the 4 existing anchor bolts (see illustration below)
We will then be able to build the base plate of the new pole to suit your existing anchor bolts.

Keywords: Anchor Bolts

Contact Dynapole

Email - none provided

Print this page

Other products and services from Dynapole


Dynapole: order checklist

Because light fixtures have widely varying mounting requirements, each pole is custom-made to receive the fixture you will be using, and so we need to have the following information before production can begin. Hundreds of special colours may be supplied if you provide the RAL colour number--an international, standard code that allows you to avoid the otherwise expensive process of custom-matching an existing colour.


Dynapole: installation guide

After curing, place the leveling nuts on the anchor bolts and screw to the bottom. Install the anchor bolts using template, with conduit, through the centre. Lower the pole onto the anchors using nylon slings. Install washers on the top of the baseplate.


Dynapole: specifications & standard features

All poles include a provision for one fixture: your choice of a tenon or single drilling; please specify the requirements of your fixture when ordering. Base mounted poles include galvanized steel anchor bolts, base cover, and one template per order; traffic poles are less anchor bolts. Many options and extras are available, and customizations will be gladly accommodated; please contact Dynapole with your requirements.


Dynapole: terms & conditions

Title and risk of all goods pass to purchaser when the contract is made or when the goods are loaded for transportation to the purchaser, whichever is sooner, but Dynapole reserves the right to retain or resume possession until the purchase price is paid in full.