Food Can and End Inspection

By: Cmc-kuhnke  09-12-2011
Keywords: Gauge, Cans, Inspection Software

 
The fastest, easiest, most reliable and most affordable computerized Double Seam inspection software available – auto SEAMview continues to set new industry standards.
   
Automatically cut can Double Seams with this seam saw for a clear image and for highly reliable Double Seam Inspection. Now with automatic tab indenter.
   
The unit is a composite device for axial load and implosion (paneling) testing of 3-piece cans up to a maximum load of 5000N.
   
This easy to use food can axial load tester measures the axial load resistance of food cans in kg, Newton or lbs without inserts or adapters.
   
When used with our Bead Profile Analyzer, this powerful software quickly evaluates Can Bead Depth, Symmetry, Width, Angles and Radii.
   
Measure more accurately with this operator independent, Bead Depth, Can Height and Flange Width measurement system for canmakers.
   
Superior Bead Depth Gauge firmware automatically determines the number of beads and ignores minor dents or imperfections.
   
The Bead Profile Analyzer scans the can in X and Y direction and sends the complete profile to an external computer.
   
The Body Blank Gauge enables simple and precise measurement of Blank Height, Blank Width and Squareness. Different users will have the same results since they are measuring with the same light force.
   
Canmakers ensure accurate slitter setups with this high-precision digital gauge for measurement of body blanks.
   
This tester for seamed beverage can ends measures the pressure at which the ends buckles. The empty closed can (standard 211 body) is put in a special holder. After the door is closed, the can is punctured and pressure is applied internally. Air rapidly fills the can until the pressure is at a level just under the expected buckle value, which can be freely set by the operator.
   
CMC-KUHNKE's popular line of buckle testers has been adapted to work with DRD and D&I 2-piece food cans, as well as beverage cans. The buckle tester comes with the option of Growth Measurement to measure the deflection of the bottom of the can.
   
This combination can height and flange width gauge measures both characteristics at once providing better readings directly to a computer database.
   
All digital Can Height Gauge measurements may be transferred from the linear scale to a computer database automatically - saving time, and eliminating data entry errors.
   
Combine can height, flange width, seam thickness and countersink depth into one convenient can inspection system.
   
Measure multiple parameters of open top pails, ringed paint cans and other large cans with the New Can Measurement Station from CMC-KUHNKE.
   
The semi-automatic Combination SEAM Gauge is equipped with Countersink Depth, Double Seam Thickness, and optionally Double Seam Height and Can Height measurement systems.
   
The CSG-2360 adds the capability of a complete 360 degree profile of the critical seam thickness measurement to our very popular CSG series of gauging.
   
Canmakers use the Compound Placement Monitor to inspect compound at the curl. The large image eliminates eye strain, and increases measurement accuracy.
   
The Countersink Depth Gauge may be used to measure more than just countersink. This Depth Gauge may be used on many different can components, on a wide range of sizes.
   
Curl Length, or Brim Width measurement preparation is fast and repeatable with this sturdy curl cutter and straightener.
   
CMC-KUHNKE USB Foot Switch for transmitting "ENTER" function of keyboard to your PC. Plugs directly into computer's USB port.
   
The digital can seam micrometer can be used to measure Double Seam Height, Coverhook, or Bodyhook when using the Teardown Method of Double Seam Inspection.
   
The EBT-1000 allows for the testing of the Burst Pressure of seamed easy open ends. The seamed can is placed inside the safety chamber. After the door is closed, the can is punctured and pressure is applied internally. Air rapidly fills the can until the pressure is at a level just under the expected burst value, which can be freely set by the operator. The precise burst point of the end is automatically recorded by the tester.
   
Clamp two Easy Open Ends into the tester and rotate the carriage. The ends are sealed in the compound area and pressure is applied. Tiny air bubbles in the water bath show exactly where the end is leaking.
   
Edlund- AIR POWERED CROWN PUNCH can opener. Standard model for cans up to 11" high (Recommended for up to 400 cans per day.)
   
HEAVY DUTY AIR POWERED CROWN PUNCH can opener. Ideal for food processors and heavy users who open from 300-2000 cans per day.
   
HEAVY DUTY INDUSTRIAL CAN OPENER WITH ALLIGATOR LID REMOVER. Fast, reliable, sanitary and safe removal of lids. Up to 3,000 cans per day.
   
MANUAL CROWN PUNCH can opener (manual) All Stainless Steel Model Including Mechanism (Recommended for up to 200 cans per day.)
   
2-Piece Can Enamel Testing fixture with contact control for use with manual single station Enamel Raters.
   
3-Piece Can Enamel Testing fixture with contact control and fill height sensor for use with manual single station Enamel Raters.
   
Beverage Can End Enamel Testing Cup with contact control for use with manual single station Enamel Raters.
   
Manual Digital Enamel Rater base unit for Can and End Enamel Testing.
   
Weld Seam Enamel Testing fixture with contact control and fill height sensor for use with manual single station Enamel Raters.
   
Accessory tester for enamel rating of cans. For use with ENR-16, 16-Station Enamel Rater for porosity testing.
   
Accessory tester for can ends. For use with ENR-16, 16-Station Enamel Rater for porosity testing.
   
Accessory for CMC-KUHNKE Enamel Rater series. Attaches to use in testing enamel on Flat Sheets.
   
Multiple diameter, semi-automatic end measurement station measures Countersink Depth, Curl Diameter and Curl Height up to 50 times around the Can End.
   
Single diameter, automatic end measurement system automatically measures Countersink Depth, Curl Diameter, Curl Height, Curl Opening, and First Bead Height.
   
Multiple Can End Diameters are automatically measured for Countersink Depth, Curl Diameter, Curl Height, Panel Depth, and First Bead Height.
   
The Digital Film Weight Gauge works with fixed and free references for different types of lacquer. The film weight reading and the lacquer type number are displayed on the LED screen.
   
Semi-Automated Measurement for 2-piece Finished Cans
   
To get the most accurate Free-Space calculations, use this precision Flange Thickness Gauge to measure the body thickness directly at the Can Flange. Can inspections have never been easier.
   
The Flange Width Gauge automatically positions the can to measure flange width across its center-line for repeatable readings.
   
This fully-automatic, online can sampling and reporting system integrates directly with the production line to receive cans and testing instructions without any operator intervention - a substantial labor savings.
   
This fully-automatic, online sampling and reporting system integrates directly with the production line to receive cans and testing instructions without any operator intervention - a substantial labor savings.
   
Gauge Wedge Software takes readings from digital gauges and sends it to any Microsoft Windows software application.
   
The first of it's kind, the Firewire IEEE1394 Handy SEAM provides a totally portable double seam measurement and inspection package for mobile quality assurance professionals.
   
The MK2000 - Double SEAM Saw is a heavy-duty can cutter and features a rugged design that will provide you with years of problem-free seam saw performance with virtually no maintenance.
   
The ENR-3000 is used to check the interior lacquer coating on cans and ends. The current is measured in µA to determine lacquer permeability. The ENR-3000 automatically switches from µA to mA [shown to 3 decimal places] when values are higher than 0.5mA. Accessories are available to allow testing of beverage, food & aerosol cans and ends, as well as side seam testing and tube testing.
   
The Curl Length Gauge is available for use with database software, or as a stand-alone gauging unit, with a digital readout.
   
Using a high-resolution camera, METview Software is compatible with virtually any metallurgical microscope on the market.
   
The Panel Implosion Tester (Panel Tester) can be used to measure the implosion force (panel strength) of two piece and three piece cans.
   
The Peel Seal Burst Tester tests the burst pressure of loose Peel Seal Ends.
   
The Plate Thickness Gauge accurately measures End Thickness and Body Thickness to 0.00005 in (0.001 mm) resolution. A convenient lifter gently opens and closes the gauge for repeatable measurements.
   
The Plug Diameter Gauge is available in a variety of custom made sizes, and with either mechanical or digital dial indicators.
   
This PNR-V-Gauge (pressure of no return/ vacuum) is a pressure tester for the determination of the return ability of seamed ends on cans closed on both sides. Four tests may be performed:
   
The Easy-Open End Pop and Tear Tester tests the force required to pop and tear open Easy- Open Can Ends.
   
The PCS-1153 is a rugged yet portable saw designed for customer service engineers who may need to cross section double seams while on the road. This lightweight saw is equipped as standard with a suitcase for protection and ease of transportation. It also includes a built in handle to further increase portability. The saw features a safety control button which must be depressed in order for the twin blades to operate.
   
Loose ends are automatically measured to test their ability to withstand pressure and then return to their original start position.
   
An extension of CMC-KUHNKE's auto S.E.A.M.view systems, the award winning Double Seam Inspection Software, RIVETview brings the benefits of high-accuracy, on-screen, computerized measurement to Rivet evaluation.
   
The SRG-3000 is CMC-KUHNKE's latest gauge for non-contact measurement of the residual score on easy open ends. The SRG-3000 features software-controlled cameras to measure the score, making it operator independent and the most repeatable score residual gauge on the market.
   
The SRG-2000 is CMC-KUHNKE's latest gauge for the measurement of the residual score on easy open ends. The SRG-2000 features software controlled, motor driven, automatic focus on the score, making it operator independent and the most repeatable score residual gauge on the market.
   
The SEAM Height Gauge provides objective and repeatable can seam height and body hook measurements; required for reliable trend analysis.
   
   
With the best %R&R and DR results in the industry, the SEAM Thickness Gauge provides objective and repeatable Double Seam Thickness measurements; required for reliable trend analysis.
   
The extremely flexible and modular S.E.A.M.scan Database Software allows you to tailor your Can Measurement and Double Seam Inspection package to suite the needs, and budget, of your organization.
   
The BBG-1300SH allows for the quick, accurate, and repeatable measurement of scroll sheets. Scroll dimensions are easily measured using the included footswitch.
   
Automatically measure Countersink Depth, Curl Diameter, Curl Height, Curl Opening, and Panel Depth for quality Endmaking.
   
This high-resolution digital seam scope for food cans clearly illuminates and captures images of can double seams.
   
The latest version of the VSM-5 - Video Seam Monitor for Double Seam Inspection - is a stand-alone device utilizing auto SEAMview 5 Software. The software is installed on a micro-PC integrated within the robust unit, making this the turn key solution for customers without adequate PC support. Featuring high resolution, USB or Firewire cameras, the VSM-5 accurately measures the double seam of food, beverage or aerosol cans.
   
Magnified approximately 100 times, weld seams are clearly visible either on the screen. Eye strain is eliminated, and accuracy increased.
   
Visionary QC™ Software for Statistical Process Control, a powerful network-ready measurement system, packaged in a friendly user interface for both novice and expert computer users.
   
Developed especially for a major 3-piece can maker, the VDG-1000 is currently the one and only volume deflection gauge on the market.
 

Can't find what you're looking for?If you're having trouble finding something, or if you need more information,
please feel free to .We'll send you complete product information and specifications, or quote you a system customized to fit your specific can and end measurement needs.

Keywords: Axial Load, beverage can, Cans, Depth Gauge, Digital Gauge, Double Seam, Gauge, Height Measurement, Inspection Software, Load Tester, Measurement System, Seam Inspection,

Contact Cmc-kuhnke

Email - none provided

Print this page

Other products and services from Cmc-kuhnke

09-12-2011

Bottles and Plastic Containers - CMC-KUHNKE

Visionary QC™ Software for Statistical Process Control, a powerful network-ready measurement system, packaged in a friendly user interface for both novice and expert computer users. The BCI-1000, Bottle Can Inspection Station, from CMC-KUHNKE uses state-of-the-art optical technology to measure critical parameters of bottle-cans with threads for caps.


09-12-2011

Inspection Systems for Special Applications

The fastest, easiest, most reliable and most affordable computerized Double Seam inspection software available – auto SEAMview continues to set new industry standards. The Firewire IEEE1394 Handy SEAM provides a totally portable double seam measurement and inspection package for mobile quality assurance professionals.


09-12-2011

Beverage Can and End Inspection

CMC-KUHNKE’s popular Beverage Dome Reversal Tester is a semi-automated buckle tester designed to determine the exact pressure at which the bottom dome of a beverage can begins to buckle. The semi-automatic Combination SEAM Gauge is equipped with Countersink Depth, Double Seam Thickness, and optionally Double Seam Height and Can Height measurement systems.


09-12-2011

Aerosol Can and End Inspection

The Aerosol Can Burst Tester is a semi-automated burst / buckle tester designed to check the pressure at which the aerosol can end will buckle, and the pressure at which the aerosol can will burst. The fastest, easiest, most reliable and most affordable computerized Double Seam inspection software available – auto SEAMview continues to set new industry standards.