InSinkErator - Customer Service and Support - install disposer

By: Insinkerator  09-12-2011
Keywords: Food Waste Disposer, Multimedia Demonstration, Waste Disposer,


If you´re shopping for an InSinkErator® food waste disposer or have just purchased one, you´ll be happy to know that InSinkErator® brand disposers are the easiest to install. That´s because all models feature our stainless steel QuickLock® sink mount. (And if you're replacing an InSinkErator® disposer, installation is even easier.) Just “twist off” the old disposer and “twist on” the new one. What's more, with QuickLock®, you can replace any disposer.

For your convenience, listed below are InSinkErator® installation instructions. Before attempting to install an InSinkErator Disposer, first read and understand the entire safety and installation instructions.

To view a multimedia demonstration of this tutorial,

.

The demonstration requires Macromedia Flash 4 player. If you don't already

have it,

to get it.

Materials Needed

  • Copper wire
  • Plumber's putty (.1 kg)
  • Wire nuts (2-Size 54)
  • Worm gear clamp
  • Dishwasher drain connector kit - optional
  • On-off electrical switch

Tools Needed

  • Hammer
  • Channel-Locks
  • Flathead screwdriver
  • Phillips screwdriver
  • Pipe wrench

Keywords: Food Waste Disposer, Multimedia Demonstration, Waste Disposer,

Other products and services from Insinkerator

09-12-2011

InSinkErator - Customer Service and Support - install dispenser

Make sure the seal is properly seated on the dispenser/valve body and that it surrounds the sink mounting hole.If you are installing Model GN1100, H990 or HC 1100, continue on to step 04a.If you are installing Model GN or HC, skip to step 04b.If you are installing Model H7700, skip to step 04c.