Dual Flame Band Burner

By: Ensign Ribbon Burners  09-12-2011
Keywords: Stainless Steel, Oxygen Analyzer

Oxygen values are displayed continuously on a easy-to-read, 0.4” (10.2 mm) high, 4-1/2 digit liquid crystal display (LCD). The instrument can be purchased in a variety of mechanical configurations ranging from a general purpose, portable device, to a NEMA 7 (explosion proof) system. The electronics enclosure used for the portable and panel mounted versions is made from durable polycarbonate and, together with the gasketed seals, is rated watertight NEMA 4X (IP66). The gas inlet and outlet connections on the sensor housing are quick-connect types. One-quarter inch stainless steel compression fittings are available upon request.


The Series 2000 Percent Oxygen Analyzer features a patented, extended life oxygen sensor with EES (enhanced electrolyte system). This sensor provides exceptional performance, accuracy, and stability. For applications where carbon dioxide is present in the sample gas, the EES retards passivation of the sensor anode by allowing the products of oxidation to dissolve in the electrolyte. In effect, the sensor is renewed continuously, resulting in an increase in sensor life even if exposed to limited amounts of carbon dioxide. In addition, the enhanced mechanical design of the sensor ensures longer life, and virtually eliminates leakage of electrolyte, a nagging (and expensive) problem associated with sensors that require electrolyte maintenance.

The eloquence of the Series 2000 Percent Oxygen Analyzer is its ease of use. The front panel contains five switches that provide access to the instrument’s settings. Each analyzer is equipped with three oxygen alarm relays and one status alarm relay as standard equipment. All four relays are Form C (SPDT) types rated at 10 amps at 115/230 VAC and 30 VDC. Each relay is user configurable for fail-safe operation. In addition to the alarm relays, the analyzer is equipped with a built-in audible alarm, as well as three front panel LEDs for visual indication of an alarm condition.

The Series 2000 Percent Oxygen Analyzer comes equipped with two analog outputs, 4-20 mADC and 0-2 VCD, for use with recorders, dataloggers, etc. For enhanced communications, the Series 2000 Percent Oxygen Analyzer can be configured with optional RS-232C or RS-485 serial communications. For multiple point installations, the RS-485 format is capable of sending digital signals over greater distances, and controlling each monitor using the same communication channel.

Keywords: Oxygen Analyzer, Stainless Steel,

Contact Ensign Ribbon Burners

Email - none provided

Print this page

Other products and services from Ensign Ribbon Burners



All systems of 100,000 BTU's or more are provided with dual gas safety valves, pressure regulator, zero gas regulator, high and low gas pressure switches, as well as a proof of closure switch for IRI requirements. This system can be built for as little as 2 burners, up to 20 or more.Each burner would be equipped with its own flame safety control, with the gas solenoids prepiped on the system.



Nickel Plating In applications where Government regulation or environmental condition require non-corrosive components, ERB can provide nickel plating for any of its burners or products.Hoses Ensign can supply a variety of flexible metal hoses for air and gas connection to your burners.


Ignition and Safety

Made of non-corrosive stainless steel bodies, the cartridges are made of the highest grade steatite that can withstand temperatures up to 1,700° F without breaking. ERB Ignition Electrodes are heavy duty, long lasting ignitors that are available in any length and design(straight, bent, flag, Spark N Ground, ect..).