By: Ensign Ribbon Burners  09-12-2011
Keywords: Stainless Steel, Hoses, Burners

Ignition Cables, Special Electrode Tips, Burner Plates, Mounting Brackets, Transformers.

Nickel Plating In applications where Government regulation or environmental condition require non-corrosive components, ERB can provide nickel plating for any of its burners or products.

Ensign can supply a variety of flexible metal hoses for air and gas connection to your burners. The least expensive hose is corrugated brass with epoxy coating, and is CSA approved and AGA Design Certified. These are available in 1/4", 3/8", and 1/2" ID sizes. The ends can be 3/8", 1/2" or 3/4" Male or Female Pipe threads. These are generally used to connect bakery burners to manifold piping. This style is also available in Stainless Steel corrugated. Brass or stainless braided hoses are available in sizes up to 2" NPT.

Swivel Joints
The Ensign Swivel Joint is designed to provide 360° rotation of burners for access, cleaning and maintenance. Used in pairs, they are available in a number of various sizes, such as 1", 1-1/2", and 2".
They allow the use of rigid piping for feeding a gas mixture to the burner, with the burner free to rotate as necessary. The bearings are relubricatable, and no field adjustment is required. The double row of bearings assures proper alignment and prevents binding caused by temperature changes and heavy radial loads. The joint is fully sealed with both inner and outer Buna-N O-ring seals.

Keywords: Burners, Hoses, Stainless Steel

Contact Ensign Ribbon Burners

Email - none provided

Print this page

Other products and services from Ensign Ribbon Burners



All systems of 100,000 BTU's or more are provided with dual gas safety valves, pressure regulator, zero gas regulator, high and low gas pressure switches, as well as a proof of closure switch for IRI requirements. This system can be built for as little as 2 burners, up to 20 or more.Each burner would be equipped with its own flame safety control, with the gas solenoids prepiped on the system.


Dual Flame Band Burner

For applications where carbon dioxide is present in the sample gas, the EES retards passivation of the sensor anode by allowing the products of oxidation to dissolve in the electrolyte. The electronics enclosure used for the portable and panel mounted versions is made from durable polycarbonate and, together with the gasketed seals, is rated watertight NEMA 4X.


Ignition and Safety

Made of non-corrosive stainless steel bodies, the cartridges are made of the highest grade steatite that can withstand temperatures up to 1,700° F without breaking. ERB Ignition Electrodes are heavy duty, long lasting ignitors that are available in any length and design(straight, bent, flag, Spark N Ground, ect..).