Biggs & Narciso - mould removal

By: Biggs & Narciso Construction Services  09-12-2011

Biggs & Narciso has unrivaled expertise and experience with the removal of moulds. We will not only remove and repair the affected areas, but will also identify and fix the root cause of the problem to prevent any reoccurrence of mould. During the remediation process, we isolate the affected area to prevent the spread of mould to unaffected areas of the building. Contaminated materials are gathered and disposed of properly to abate any secondary mould contamination. Mould is a common problem that must be completely removed to avoid further problems. Our work has been proven effective in dozens of buildings throughout Ontario. Biggs and Narciso can work with you to remedy your mould problem regardless of how small or large. And we can provide follow-up assistance to curtail any future mould problems in your building.

Moulds are a type of fungus that are found almost anywhere - both outdoors and indoors. Indoor moulds usually originate from outside organic sources such as soil and vegetation. As part of their reproductive cycle, moulds produce millions of microscopic particles called spores. Moulds spread by releasing these spores into the air. The presence of moisture is essential for moulds to grow and they are therefore usually found in damp, poorly ventilated areas. Bathrooms are an ideal place for fungus growth. While the individual spores are invisible to the naked eye, mould colonies are visible as colourful, woolly growths. Mould spores are a major source of indoor air pollution causing allergic reactions similar to hay fever. Often people who experience allergic reactions to mould spores are susceptible to asthma. In many cases, simply limiting sources of moisture and condensation and improving ventilation can reduce the presence of mould spores.

Contact Biggs & Narciso Construction Services

Email - none provided

Print this page

Other products and services from Biggs & Narciso Construction Services


Biggs & Narciso - fireproofing

Spray applied products include cementitious and mineral fibre applications provide up to 4 hour fire ratings; acoustical applications yield noise reduction coefficient ratings up to 1.05 and thermal ratings are 3.85 per inch of material applied.


Biggs & Narciso - pcbs

They were used in many different types of products including hydraulic fluid, casting wax, pigments, carbonless copy paper, plasticizer, vacuum pumps, compressors and heat transfer systems. We ensure that any such equipment is properly extracted and sealed in government regulation drums, properly labeled and shipped to a registered storage facility to await destruction.


Biggs & Narciso - asbestos removal

Biggs and Narciso understand the risks and the importance of proper procedures when working with asbestos removal and how to dispose of asbestos so that there are no continued risks. These materials are extremely resistant to acid and fire making them highly attractive for use in manufacturing building materials subject to extreme heat or acidic conditions.


Biggs & Narciso - demolition

Since the majority of our asbestos abatement projects required some type of demolition, it was logical step for Biggs and Narciso to offer demolition as part of our service package. The scope of our demolition work now ranges from selective demolition of a single room, to completely gutting a building to its bare structure allowing for reconstruction.


Biggs & Narciso - lead removal

Clean up should be done with a HEPA (High Efficiency Particulate Air Filter) vacuum cleaner to ensure a thorough pickup is done without releasing more lead particulates into the air. We will retrofit plumbing to building code specifications and renovate to a finished condition ready for occupation – completely lead free. Waste containers should be properly labeled as containing lead contaminated material and disposed of as hazardous waste.