Boat Lifts

By: On The Water Designs  09-12-2011
Keywords: Boat, Lifts, Hoists

Craftlander Vertical series lifts are constructed of special T-6 6061 aluminum extrusions and load tested from 130% to 200% its rated capacity. Much of the hoists construction utilizes bolts rather than welds to allow for easy transportation and on site assembly. The hoists high vertical lift design keeps your boat far out of waves reach. Informed consumers prefer the vertical type design due to the increased lift capacity and safer frame design.

Craftlander PWC series lifts are constructed the same as the vertical series and are available in 3 models, two economical scissor type and one vertical lift.1. All hoists have fully adjustable legs with pivoting base pads for level installation.
2. Stainless cables and corrosion resistant fasteners.
3. Durable nylon pulleys with bronze bushings.
4. Unlike other hoists the Craftlander patented chain and gear driven winch system is made for boat hoists, it is not a simple boat trailer winch. They are sized and geared accordingly to the lifts weight capacity and still easy to turn on all hoist sizes. The winch wheel is larger than most, a full 48” in diameter allowing for easy use.  Unlike other lower cost winch systems, Craftlander incorporates a winch cable guide to evenly distribute cable across the drum which prevents cable climbing and bunching.
5. All hoists have standard adjustable bunks that will accept in-board ski boats.
6. Optional full length guide on bunks, and motor stop.Optional solar powered 12v winch unit is available and comes with a solar panel and mounting bracket.
Optional roof systems are available in the colour multiple coloursNot sure what you need?

Keywords: Boat, Hoists, Lifts

Contact On The Water Designs

Email - none provided

Print this page

Other products and services from On The Water Designs

09-12-2011

Dock Floats

These dock floats have a nominal .150 wall thickness and are rotational molded from virgin grade materials with UV inhibitors assuring long life. Permafloat® dock floats are ideally suited for all types of applications including commercial, marinas and aquaculture facilities. There are 32 sizes ranging from 2'x4'x12" all the way up to 4'x8'x32". On The Water Designs is now offering Permafloat® dock floats. They carry a 15 year warranty.


09-12-2011

Products

On the Water Designs also stocks a comprehensive line of Dock Accessories such as Ladders, Cleats, Bumper Strip, Solar Lights, Mooring Whips and Dock Floats. Depending on your shoreline an Aluminum Pole Dock may suit or check out our Modular Floating Docks, Tower Docks, Boat Lifts, PWC Lifts and Swim Rafts. Our innovative marine systems are available in our Designer Series or Leisure Series dock lines.


09-12-2011

Docks

Dock sections are designed with an eye to the future; new sections can be added to our existing dock easily and at a reasonable cost. Whether it’s a Pole Dock, Floating Dock, Tower Dock On the Water Designs has the solution for your waterfront. Each section is crafted with marine-grade aluminum framing and support poles and Western Red Cedar decking.


09-12-2011

Marine Railway

Keeping your boat safe is a top priority for most owners, and nothing works better than a marine railway or roller ramp system to get your boat right out of the water and on to dry land. Marine Railway systems are designed to support boats up to 6000lbs, while much smaller craft are generally suited for a more simple roller ramp system. Try a Shore Docker Kit.


09-12-2011

Dock Accessories

Dock Accessories from On the Water Designs give your dock that personal touch that will set it apart from the others. Cleats and Bumpers ensure your boat stays safely moored to your dock. If you don't see what you're looking for online let us know. Solar Lights work well to help mark your dock at night.