Functional Test ARM Emulation Concurrent Test

By: Intellitech  09-12-2011
Keywords: Fault Coverage

The PT100 Pro solves the test challenges and cost requirements of testing small, high-volume PCBs used in the home, mobile, entertainment, automotive and embedded markets.  PCBs in these markets are cost sensitive yet require high volume, high fault coverage on leading edge technologies such as WiFi, DDR Memory, USB, Bluetooth, Nand Flash, MPEG decoders, Power Management Units, and MMC/Smart Cards interfaces.  Miniaturization makes traditional test point access to both digital and analog nets difficult or impossible.

Keywords: Fault Coverage

Other products and services from Intellitech

09-12-2011

Multi-Site Concurrent JTAG/IJTAG test

As test time and in-system configuration times continue to increase, the PT100 can keep up with the fastest production line without sacrificing on product test quality or resorting to pre-programming non-volatile parts. The PT100 Parallel Tester cards are housed in a 19" 3U height rack mountable box with room for 16 plug-able cards, each one supporting 24 re-configurable tester channels and one IEEE 1149.1 controller.


09-12-2011

Boundary Scan(1149.1) Manufacturing Test

The test engineer creates this .tst file in advance and supplies it with information such as the location and name of the Eclipse database, DUT options file, and ScanExecutive Scripting Language fileand optionally, any debug files for using Visual Fault AnalyzerTM and Schematic Logic ProbeTM.


09-12-2011

JTAG Boundary-Scan Test (IEEE 1149.1) and FPGA CPLD Automatic Test Generation Program software by Intellitech Corp

With other IEEE 1149.1 tools much of the test engineer's time is spent re-entering design information through proprietary GUIs, creating 'characteristic' models for non-JTAG devices or describing PCB level busses in proprietary Heirarchical description languages.


09-12-2011

DFT Design-for-Test Boundary Scan components

The TEST-IP family provides pre-engineered and proven infrastructure for embedded configuration and test, fast in-system FLASH programming and scan chain management for PCB and systems. The Infrastructure IP is independent of the functional design and takes the form factor of an individual IC, soft macro or binary bitstream for embedding in FPGA/CPLD devices.


09-12-2011

FPGA Configuration FPGA Security FPGA Trojan bitstream Built-in-Test

Many teams have turned to 'home-brewed' customized solutions that leverage on-board commodity FLASH memory to store configuration data and a microprocessor or CPLD to sequence the configuration bitstreams into the FPGA directly. I started to design my new PCB with XC1800 series configuration PROMS, I changed my design to use SystemBISTTM for on-board FPGA configuration and embedded test when I saw the cost and test benefits for LTX..


09-12-2011

JTAG TEST

The pattern sets are known to be 'deterministic' which is a fancy word meaning that the test patterns generated have a pre-determined fault coverage on the PCB and have a pre-determined diagnostic to the IC pin. Eclipse products enable companies to develop and execute manufacturing tests and perform in-system device programming and configuration using the IEEE 1149.1 test infrastructure.