APREL EM-ISight - EMC/EMI Measurement System

By: Aprel  09-12-2011

EM-ISight is ideal as a primary EM test instrument for conformity testing, research, development or as a production audit system. Product approval of Integrated Circuits, LCD, GPS, Video Controllers, connectors, wireless modules, antennas and electrical/electronic interfaces can be assessed on the EM-ISight using the fully flexible test application software. The integration of 5 or 6 axis robots as supplied by DENSO means that this system can measure in traditional Cartesian or advanced horizontal plains.

APREL EM-ISight is an affordable and easy to use system for beginners or experienced EM engineers. The system is ideal for de-sense testing of receiver circuits and can be used to manage product development cycles and identify problematic areas of complex circuit design. Designed for small, medium or large organizations that develop, certify or improve on product design it is a fully expandable system that can grow with the needs of the user.

Custom applications can be added to this truly unique  test platform. The footprint of the system means that it can be introduced to most measurement environments with little effort. The system can be located into a controlled environment and allow for a sensitivity testing of below -140dBm.

EM-ISight 4.0 Supported Spectrum analyzer models

MS2711D

MS2661C*

E4401B

E7401A

FSG

FSQ

MS2712E

MS2663C*

E4402B

E7402A

FSL

FSU

MS2713E

MS2665C*

E4403B

E7403A

FSP

FSV

MS2717B

MS2668C*

E4404B

E7404A

MS2718B

MS2681A*

E4405B

E7405A

MS2719B

MS2683A*

E4406A

N1996A

MS2721B

MS2690A*

E4407B

N8201A

MS2722C

MS2691A*

E4408B

N9000A

RSA5103A

MS2723B

MS2692A*

E4411B

N9010A

RSA5106A

MS2723C

E4440A

N9020A

RSA6106A

MS2724B

E4443A

N9030A

RSA6114A

MS2724C

E4445A

N9320A

RSA6120A

MS2725C

E4446A

N9320B

 MS2726C

E4447A

E4448A

* Note: These are legacy spectrum lanalyzers. APREL do not guarantee full compatibility.

All Agilent and Rohde&Schwarz spectrum analyzers must support TCP/IP and IVI.


Other products and services from Aprel

09-12-2011

APREL - Systems

APREL is committed to the development of new and comprehensive methodologies for SAR, HAC and EMC/EMI measurements through international standards work and internal research. The goal is to provide a solution for more accurate and repeatable testing to cover the needs of manufacturers, laboratories, research institutions. APREL specializes in designing and manufacturing a fleet of fully automated measurement systems.


09-12-2011

APREL ALSAS 10U - Comprehensive SAR Test System

Various phantoms – SAM Phantom, UniPhantom™, Universal Flat Phantom and others, can be easily moved, interchanged and integrated onto Universal Workstation™ to result in a highly flexible and time-efficient measurement process. The ALSAS-10U engineering design team is strongly focused on application development, and has developed custom modular software to allow for the broadest range of wireless SAR testing applications.


09-12-2011

APREL Dipoles

Dipoles are tuned to specified frequency for tissue and air for probe calibration, system performance check and/or system validation as required by compliance test standards. APREL has developed a range of dipoles for use in dosimetric and near/far field applications with all commercial SAR and HAC systems. We offer a range of dipoles for RF shielded enclosure certification and anechoic antenna measurement certification.


09-12-2011

APREL home

APREL have developed hand held antenna probes that can be used to sniff out problems on a circuit board that may be causing EMC noise. The antenna probes come in E and H field versions and can be used as either a receiver or method to excite a circuit. Typical frequency application for each probe is from 100kHz to 6GHz all in one single package. These probes come in custom lengths and can be adapted very easily when required.


09-12-2011

APREL MiNi-HAC - Hearing Aid Compatibility Test System

MiNi-HAC™is ideal as a primary compliance instrument for Hearing Aid Compatibility or as a design/development tool for HAC Audio and near-field RF E-and H-Field emission evaluation for wireless handsets and hearing aids. RF Emissions Test - Measurements of the near-field electric field and magnetic fields emitted by a WD. The system is designed for developers, compliance experts, regulators, and researchers.


09-12-2011

APREL Services

SAR TestingAPREL utilizes the ALSAS-10U automated SAR assessment system within a fully shielded certified SAR test environment for all levels of testing and certification of the most current technologies - WiFi, WiMax, Cellular, GSM, LTE, CDMA, WCDMA.Test capability is from 30MHz up to 6GHz with coverage for handsets, computers and BTS antennas.