Vibration Absorber for air conditioning and refrigeration systems

By: Greatstone International  09-12-2011
Keywords: Copper Tube, Vibration Absorber

GSI Vibration Absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping.   It can also be used in water pipe applications.

Our Vibration Absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength.  Tubing and braid are reinforced by ferrules at each end, and connected to female copper tube ends by high temperature braze alloys. Each Vibration Absorber is pressure tested, then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device.

UL & CE Approval

Features
Hose and copper tube are braze welded
Cleaned and dehydrated for refrigeration service
Each unit is pressure and vacuum tested, cleaned, dehydrated and sealed in plastic film
Complete physical and chemical analysis of all basic components
Sized to fit 5/8" through 2 1/8" O.D., having a corrugated stainless core with high tensile stainless braid covering and copper tube ends
Components checked and inspected at various phases of assembly
Ends accurately sized

Specifications

(Specifications and dimensions are subject to change without notice)

Please contact us today for a quote or for more information about our Vibration Absorbers.

Keywords: Copper Tube, Vibration Absorber

Contact Greatstone International

Email

Print this page

Other products and services from Greatstone International

09-12-2011

Connection Pipe for Air Conditioning

This product has been rigorously tested for performance and confirmed to specifications in the following areas: Air tight, pressure resistant, mechanical performance, interior of pipe clean and dry, bending, flattening, enlargement, corrosion resistant, and chemical composition.


09-12-2011

HVACR Coils for heating, cooling, steam, custom-design

Condenser Design Design Pressure: No deformation under 4.0 MPa pressureLeakage: annual leakage less than 5gContent of impurity: <40 mg/m2Moisture: <40mg/m2Air tightness: No leakage at 2.5 MPa air pressure. Evaporator Design Design Pressure: No deformation at 4.0 MPa pressureLeakage: annual leakage less than 5gContent of impurity: <40 mg/m2Moisture: <40mg/m2Air tightness: No leakage at 2.5 MPa air pressure.


09-12-2011

HVACR procurement service, China sourcing partner

Because our GSI engineers have substantial experience in the HVACR industry, they are able to pre-engineer and pre-test your products to ensure that they meet your specifications, a service that few global sourcing companies can offer.


09-12-2011

Ball Check Valve for refrigeration systems

The sealed metal in the compressor discharge pipe of the Steel Ball Check Valve is used to prevent the refrigerant gas from returning to the compressor from the condenser when it stops working. Features High pass capacity with direct flow designAll metal permits high temperatureChoice of fixed inside spring. Our Steel Ball Check Valve is a ball style design. Steel Ball Check Valve specification chart.


09-12-2011

HVACR fan guards, motor mounts & wire grills

Fabrication:• High quality wire is selected for maximum strength• Spot welding assembly by certified welders• Precision tooling• Accuracy guaranteed by stringent quality control inspecting strength and adhesion. Motor Mount and Wire Fan Guardsor their combinations are specifically designed for HVAC fan/motor applications. All of our products are custom engineered and manufactured to meet our customer’s specifications.