Ball Check Valve for refrigeration systems

By: Greatstone International  09-12-2011
Keywords: Check Valve, Copper Tube, Steel Ball

Our Steel Ball Check Valve is a ball style design.  The sealed metal in the compressor discharge pipe of the Steel Ball Check Valve is used to prevent the refrigerant gas from returning to the compressor from the condenser when it stops working.

Features
High pass capacity with direct flow design
All metal permits high temperature
Choice of fixed inside spring

Design

1. Copper tube (TP2Y2)

2. Spring (65Mn)
3. Steel ball (Gcr15)
4. Valve seat (HPb59-1)

Steel Ball Check Valve specification chart

(Specifications and dimensions are subject to change without notice)

Please contact us today for quote or more information regarding our Steel Ball Check Valves.

Keywords: Check Valve, Copper Tube, Steel Ball

Contact Greatstone International

Email

Print this page

Other products and services from Greatstone International

09-12-2011

Connection Pipe for Air Conditioning

This product has been rigorously tested for performance and confirmed to specifications in the following areas: Air tight, pressure resistant, mechanical performance, interior of pipe clean and dry, bending, flattening, enlargement, corrosion resistant, and chemical composition.


09-12-2011

HVACR Coils for heating, cooling, steam, custom-design

Condenser Design Design Pressure: No deformation under 4.0 MPa pressureLeakage: annual leakage less than 5gContent of impurity: <40 mg/m2Moisture: <40mg/m2Air tightness: No leakage at 2.5 MPa air pressure. Evaporator Design Design Pressure: No deformation at 4.0 MPa pressureLeakage: annual leakage less than 5gContent of impurity: <40 mg/m2Moisture: <40mg/m2Air tightness: No leakage at 2.5 MPa air pressure.


09-12-2011

Vibration Absorber for air conditioning and refrigeration systems

GSI Vibration Absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Our Vibration Absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength.


09-12-2011

HVACR procurement service, China sourcing partner

Because our GSI engineers have substantial experience in the HVACR industry, they are able to pre-engineer and pre-test your products to ensure that they meet your specifications, a service that few global sourcing companies can offer.


09-12-2011

HVACR fan guards, motor mounts & wire grills

Fabrication:• High quality wire is selected for maximum strength• Spot welding assembly by certified welders• Precision tooling• Accuracy guaranteed by stringent quality control inspecting strength and adhesion. Motor Mount and Wire Fan Guardsor their combinations are specifically designed for HVAC fan/motor applications. All of our products are custom engineered and manufactured to meet our customer’s specifications.