Z7 Xtreme | Mathews Inc

By: Mathews  09-12-2011
Keywords: Bow Strings, Idler Wheel

The

by Mathews drastically reduces vibration and virtually eliminates post-release noise.

Technology results in a stronger, lighter-weight riser.

While they've become the visual identifier of a Mathews bow,

are weights that float in an elastomer wheel to absorb recoil vibration in the riser. The reduction in recoil vibration is so significant in this Mathews technology that is has been licensed for use in other industries.

The SlimLimbs on a Mathews bow ride on these spindle-shaped limb turrets, which spread the load and cradle the limbs.

Three

comes standard on the entire 2011 Z-Series line and equates to a minimal speed loss of 1-2 fps total with virtually all string and cable sound and vibration eliminated.

Parallel Limbs are yet another Mathews innovation that has been adopted by other bow companies. The more parallel a bows limbs, the more they tend to cancel each others recoil and vibration resulting in a smoother shooting bow.

The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard.  Traditional roller guards position cables on the back side of the roller guard and cause the cables to wrap tighter as the bow is drawn back and therefore places more pressure on the cables.  The Reverse Assist™ Roller Guard allows the cable to roll with less tension in a fully contained roller guard and ultimately makes the bow smoother since there is less tension on the cable.

The Walnut grip on a Mathews bow has a distinctive layered line with a special red wood inlay that indicates the centerline of the bow.

Spherelock is our cutting-edge positive-locking limb cup system. Its trim, lightweight and pivots to ensure constant and positive downward limb pressure.

aid in reduction string vibration in order to gain more speed.

Without

bow strings would whiplash back and forth between the cam and idler wheel upon release.

deaden that vibration making for a much quieter and smoother shot.

Mathews Genuine Accessories are designed and manufactured to precise standards which optimize performance and provide perfect fit, finish and quality to your Mathews bow.   You’ll find Mathews innovation within each product and experience excellence in every shot. Find Mathews Genuine Accessories exclusively at Authorized Mathews Retailers.

Hover over any feature for details.

Keywords: Bow Strings, Idler Wheel

Other products and services from Mathews

09-12-2011

MR8 | Mathews Inc

This is important to remember because unless you are shooting the same specs used to attain IBO speed ratings, your bow of choice will not shoot as quickly as you might think.. In other words, a bow set at 70lbs, with 80% let-off, will only require that the shooter hold back 14lbs of weight when the bow is at full draw.. The IBO speed rating for a bow is reached by shooting a 350 grain arrow at 70lbs of draw weight and 30 inches of draw length.


09-12-2011

Compound Bows | Mathews Inc

Features the new advanced GeoGrid™ riser, Harmonic Stabilizer Lite, and a lightweight Reverse Assist Roller Guard which results in a super smooth draw. Also packs two decades’ worth of single-cam advancements into the all-new Heli.


09-12-2011

Helim | Mathews Inc

Three Monkey Tails™ comes standard on the NEW 2012 Helim and equates to a minimal speed loss of 1-2 fps total with virtually all string and cable sound and vibration eliminated. The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard.


09-12-2011

Jewel | Mathews Inc

The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard. While they've become the visual identifier of a Mathews bow, Harmonic Dampers are weights that float in an elastomer wheel to absorb recoil vibration in the riser.