Helim | Mathews Inc

By: Mathews  09-12-2011
Keywords: Bow Strings, Harmonic Dampers, Idler Wheel,

The Dead End String Stop Lite™ by Mathews drastically reduces vibration and virtually eliminates post-release noise.

The Helim™ integrates the Grid Lock pattern in an advanced geometric design called GeoGrid™. This technological breakthrough creates an ultra-rigid lightweight riser, making the Helim one of the industry’s lightest hunting bows.

While they’ve become the visual identifier of a Mathews bow, Harmonic Dampers are weights that float in an elastomer wheel to absorb recoil vibration in the riser. The reduction in recoil vibration is so significant in this Mathews technology that is has been licensed for use in other industries.

New for 2011, the Harmonic Stabilizer evolves!  The Harmonic Stabilizer Lite will give optimum performance and reduce nearly 75% residual vibration and is nearly 70% lighter than the original Harmonic Stabilizer!

The SlimLimbs on a Mathews bow ride on these spindle-shaped limb turrets, which spread the load and cradle the limbs.

Three Monkey Tails™ comes standard on the NEW 2012 Helim and equates to a minimal speed loss of 1-2 fps total with virtually all string and cable sound and vibration eliminated.

In 1996 Mathews pioneered parallel-limb technology — now the industry standard in bow design. Parallel limbs travel in a vertical motion to cancel vibration and create a smoother, quieter bow.

The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard.  Traditional roller guards position cables on the back side of the roller guard and cause the cables to wrap tighter as the bow is drawn back and therefore places more pressure on the cables.  The Reverse Assist™ Roller Guard allows the cable to roll with less tension in a fully contained roller guard and ultimately makes the bow smoother since there is less tension on the cable.

Mathews’ proprietary NEW for 2011 SE5 Composite Slim Limb Technology raises performance and efficiencies to unprecedented levels.

In 1992 Matt McPherson introduced the revolutionary concept of single-cam technology. His innovation changed archery forever! How? Timing and synchronization issues became history. As a result, accuracy improved, and recoil and noise nearly vanished. – The Helim cam culminates 20 years of single-cam advancements.

Spherelock is our cutting-edge positive-locking limb cup system. Its trim, lightweight and pivots to ensure constant and positive downward limb pressure.

String Grubs aid in reduction string vibration in order to gain more speed.

Without String Suppressors bow strings would whiplash back and forth between the cam and idler wheel upon release. String suppressors deaden that vibration making for a much quieter and smoother shot.

Mathews Genuine Accessories are designed and manufactured to precise standards which optimize performance and provide perfect fit, finish and quality to your Mathews bow.   You’ll find Mathews innovation within each product and experience excellence in every shot. Find Mathews Genuine Accessories exclusively at Authorized Mathews Retailers.

Hover over any feature for details.

Keywords: Bow Strings, Harmonic Dampers, Idler Wheel,

Other products and services from Mathews

09-12-2011

MR8 | Mathews Inc

This is important to remember because unless you are shooting the same specs used to attain IBO speed ratings, your bow of choice will not shoot as quickly as you might think.. In other words, a bow set at 70lbs, with 80% let-off, will only require that the shooter hold back 14lbs of weight when the bow is at full draw.. The IBO speed rating for a bow is reached by shooting a 350 grain arrow at 70lbs of draw weight and 30 inches of draw length.


09-12-2011

Compound Bows | Mathews Inc

Features the new advanced GeoGrid™ riser, Harmonic Stabilizer Lite, and a lightweight Reverse Assist Roller Guard which results in a super smooth draw. Also packs two decades’ worth of single-cam advancements into the all-new Heli.


09-12-2011

Jewel | Mathews Inc

The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard. While they've become the visual identifier of a Mathews bow, Harmonic Dampers are weights that float in an elastomer wheel to absorb recoil vibration in the riser.


09-12-2011

Z7 Xtreme | Mathews Inc

The Reverse Assist™ Roller Guard reduces friction for a smoother draw cycle by positioning cables in a reverse manner; in front rather than behind the roller guard. The reduction in recoil vibration is so significant in this Mathews technology that is has been licensed for use in other industries. The SlimLimbs on a Mathews bow ride on these spindle-shaped limb turrets, which spread the load and cradle the limbs.