Planers

By: Delta International Machinery  09-12-2011
Keywords: Product Details

\

Products

\

Planers

Product Images

Product Details

6 Products in this category

  • Motor: 15 A, 120V, 1 Phase, 60 Hz
  • Motor Control: Oversized on/off paddle switch
  • Max Width of Stock: 13"
  • Max Thickness of Stock: 6"
  • Minimum Thickness Capacity: 1/8"
  • Max Depth of Cut: 1/8"
  • Min Length of Stock: 10"
  • Feed Rate: 26 FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 2"
  • Cutterhead Speed: 10,000 RPM
  • Infeed Rolls: Nitrile Rubber
  • Outfeed Rolls: Nitrile Rubber
  • Table Size: 13"x12-1/2"
  • Table Bed Rolls: NA
  • Chip Chute Opening: Included 4" Dust Port
  • Height: 19.5"
  • Width: 22"
  • Depth: 14"
  • Weight: 76 lbs
  • Motor: 3 HP, 240V, 1 Phase, 60 Hz
  • Motor Control: NA
  • Max Width of Stock: 15"
  • Max Thickness of Stock: 6-1/2"
  • Minimum Thickness Capacity: 1/8"
  • Max Depth of Cut: 1/8"
  • Min Length of Stock: 12"
  • Feed Rate: 16 FPM, 30 FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 3"
  • Cutterhead Speed
    15,000 CPM
    5,000 RPM
  • Infeed Rolls: Solid Serrated Steel
  • Outfeed Rolls: Polyurethane
  • Table Size: 15"x62-1/2"
  • Table Bed Rolls: NA
  • Chip Chute Opening: 4" and 5"
  • Height: 26.5"
  • Width: 28"
  • Depth: 20.5"
  • Weight: 340 lbs
  • Motor: 7-1/2 HP, 3 Phase, 220/440V (wired 220V), 60 Hz
  • Motor Control:  24V, Low Voltage Control
  • Max Width of Stock: 24"
  • Max Thickness of Stock: 8-5/8"
  • Minimum Thickness Capacity: 11/64"
  • Max Depth of Cut: 3/16"
  • Min Length of Stock: 9"
  • Feed Rate: 20/30 FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 3-1/8"
  • Cutterhead Speed: 5,000 RPM
  • Infeed Rolls
    Sectional Serrated: 3" dia.
  • Outfeed Rolls
    Polyurethane: 2-3/8" dia.
  • Table Size: 22"x28"
  • Table Bed Rolls: (2) adjustable
  • Chip Chute Opening: 6" O.D. Standard
  • Height: 50"
  • Width: 48"
  • Depth: 36"
  • Weight: 980 lbs
  • Motor: 1 Phase, 5 HP, 220V, 60 Hz
  • Motor Control: 24V, Low Voltage Magnetic Control
  • Max Width of Stock: 20"
  • Max Thickness of Stock: 8-5/8"
  • Minimum Thickness Capacity: 11/64"
  • Max Depth of Cut: 1/8"
  • Min Length of Stock: 9"
  • Feed Rate: 20/30 FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 3-1/8"
  • Cutterhead Speed: 5,000 RPM
  • Infeed Rolls
    Sectional Serrated: 3" dia.
  • Outfeed Rolls
    Polyurethane: 2-3/8" dia.
  • Table Size: 22"x28"
  • Table Bed Rolls: (2) adjustable
  • Chip Chute Opening: 6" O.D. Standard
  • Height: 49"
  • Width: 44.5"
  • Depth: 32"
  • Weight: 840 lbs
  • Motor: 3 Phase, 5 HP 220/440V (Wired 220V), 60 Hz
  • Motor Control: 24V, Low Voltage Magnetic Control
  • Max Width of Stock: 20"
  • Max Thickness of Stock: 8-5/8"
  • Minimum Thickness Capacity: 11/64"
  • Max Depth of Cut: 3/16"
  • Min Length of Stock: 9"
  • Feed Rate: 20/30 FPM FPM
  • Number of Knives: 3
  • Cutterhead Diameter: 3-1/8"
  • Cutterhead Speed
    5,000 RPM
  • Infeed Rolls
    Sectional Serrated: 3" dia.
  • Outfeed Rolls
    Polyurethane: 2-3/8" dia.
  • Table Size: 22"x28"
  • Table Bed Rolls: (2) adjustable
  • Chip Chute Opening: 6" O.D. Standard
  • Height: 49"
  • Width: 44.5"
  • Depth: 32"
  • Weight: 840 lbs

Keywords: Product Details

Contact Delta International Machinery

Email

Print this page

Other products and services from Delta International Machinery

09-12-2011

Dust Management

Standard Bag Filtration: Outer Filter: 5 micron electrostatic filter. Filter Cycle: 20'x20'x8' room, 10, 14, 22 times/hour. 1/5 HP, 1,025 rpm, 120V, 1 Phase, 60 Hz. Max CFM: 540, 730, 1,200 CFM.


09-12-2011

Jointers

Motor: 1-1/2 HP, 120/240V, 60 Hz, 1 Phase TEFC, 3,450 rpm. Cut Capacity: Depth - 1/8. Fence Tilt In and Out.


09-12-2011

Band Saws

Blade Length: min 91-1/2"; max 94"; Standard 93-1/2"; Length: max 106"; min 103-1/2"; Standard 105. Capacity Blade to Frame: 13-3/4. Max Rip To Right Of Blade.


09-12-2011

Drilling & Boring Machines

Motor Control: On/Off Push Button. Chuck to Table Capacity: 24-1/2.


09-12-2011

Lathes

Distance between Centers: 16-1/2"; with Extension: 42. Drive Spindle Thread Count: 1"-8 RH TPI Thread. Tailstock through Hole: 13/32" Self-ejecting. Motor Control: Electronic Variable Speed. 250-700, 600-1,800 and 1,350-4,000 rpm.