Lathes

By: Delta International Machinery  09-12-2011
Keywords: Product Details

Product Images

Product Details

2 Products in this category

  • Motor: 1 HP max, 120V, 60 Hz, 1 Phase
  • Motor Control: Electronic Variable Speed
  • Speed: 250-700, 600-1,800 and 1,350-4,000 rpm
  • Swing Over Bed: 12-1/2"
  • Swing Over Base: 9-9/16"
  • Distance between Centers: 16-1/2"; with Extension: 42"
  • Drive Spindle Thread Count: 1"-8 RH TPI Thread
  • Drive Spindle through Hole: 15/32"
  • Head and Tailstock Taper: #2 MT MT
  • Tailstock through Hole: 13/32" Self-ejecting"
  • Tailstock Spindle Travel: 2-1/4"
  • Tool Rest: 6" and 10"
  • Length: 36"
  • Width: 11"
  • Height: 17-3/4"
  • Weight: 97 lbs
  • Shipping Weight: NA
  • Motor: 3/4 HP max, 120V, 60 HZ, 1 Phase
  • Motor Control: ON/OFF Switch
  • Speed: 500; 950; 1,550; 2,700 and 4,000 rpm
  • Swing Over Bed: 12-1/2"
  • Swing Over Base: 9-9/16"
  • Distance between Centers: 16-1/2"; with Extension: 42"
  • Drive Spindle Thread Count: 1"-8 RH TPI Thread
  • Drive Spindle through Hole: 15/32"
  • Head and Tailstock Taper: #2 MT MT
  • Tailstock through Hole: 13/32" Self-ejecting"
  • Tailstock Spindle Travel: 2-1/4"
  • Tool Rest: 6" and 10"
  • Length: 36"
  • Width: 11"
  • Height: 17 3/4"
  • Weight: 93 lbs
  • Shipping Weight: NA

Keywords: Product Details

Contact Delta International Machinery

Email

Print this page

Other products and services from Delta International Machinery

09-12-2011

Dust Management

Standard Bag Filtration: Outer Filter: 5 micron electrostatic filter. Filter Cycle: 20'x20'x8' room, 10, 14, 22 times/hour. 1/5 HP, 1,025 rpm, 120V, 1 Phase, 60 Hz. Max CFM: 540, 730, 1,200 CFM.


09-12-2011

Jointers

Motor: 1-1/2 HP, 120/240V, 60 Hz, 1 Phase TEFC, 3,450 rpm. Cut Capacity: Depth - 1/8. Fence Tilt In and Out.


09-12-2011

Band Saws

Blade Length: min 91-1/2"; max 94"; Standard 93-1/2"; Length: max 106"; min 103-1/2"; Standard 105. Capacity Blade to Frame: 13-3/4. Max Rip To Right Of Blade.


09-12-2011

Drilling & Boring Machines

Motor Control: On/Off Push Button. Chuck to Table Capacity: 24-1/2.


09-12-2011

Planers

Motor Control: Oversized on/off paddle switch. Chip Chute Opening: Included 4" Dust Port. Max Thickness of Stock: 6. Feed Rate: 16 FPM, 30 FPM.