Drilling & Boring Machines

By: Delta International Machinery  09-12-2011

This product has DELTA's Twinlaser Feature

  • Motor: 3/4 HP, 120/240V (Wired 120V), 1 Phase, 60 Hz
  • Motor Control: On/Off Push Button
  • Speeds: 16 (215-2,750 rpm)
  • Table Size: 18"x14"
  • Table Tilt
    L and R: 0-90°
    Forward: 0-45°
  • Table Insert: 3-3/4"x3-3/4"
  • Column Diameter: 3.15"
  • Spindle Taper: #2 Morse Taper
  • Chuck Taper: Jacobs 3
  • Quill Diameter: 1-3/4"
  • Quill Stroke: 4-7/8"
  • Key Chuck Capacity: 5/8"
  • Chuck to Table Capacity: 24-1/2"
  • Chuck to Base Capacity: 44-1/2"
  • Height: 70"
  • Width: 18"
  • Depth: 28"
  • Weight: 238 lbs
  • Shipping Weight: 268 lbs


Contact Delta International Machinery

Email

Print this page

Other products and services from Delta International Machinery

09-12-2011

Dust Management

Standard Bag Filtration: Outer Filter: 5 micron electrostatic filter. Filter Cycle: 20'x20'x8' room, 10, 14, 22 times/hour. 1/5 HP, 1,025 rpm, 120V, 1 Phase, 60 Hz. Max CFM: 540, 730, 1,200 CFM.


09-12-2011

Jointers

Motor: 1-1/2 HP, 120/240V, 60 Hz, 1 Phase TEFC, 3,450 rpm. Cut Capacity: Depth - 1/8. Fence Tilt In and Out.


09-12-2011

Band Saws

Blade Length: min 91-1/2"; max 94"; Standard 93-1/2"; Length: max 106"; min 103-1/2"; Standard 105. Capacity Blade to Frame: 13-3/4. Max Rip To Right Of Blade.


09-12-2011

Lathes

Distance between Centers: 16-1/2"; with Extension: 42. Drive Spindle Thread Count: 1"-8 RH TPI Thread. Tailstock through Hole: 13/32" Self-ejecting. Motor Control: Electronic Variable Speed. 250-700, 600-1,800 and 1,350-4,000 rpm.


09-12-2011

Planers

Motor Control: Oversized on/off paddle switch. Chip Chute Opening: Included 4" Dust Port. Max Thickness of Stock: 6. Feed Rate: 16 FPM, 30 FPM.