Dekfast™ | SFS Intec USA

By: SFS intec USA  09-12-2011

  • Low Slope Roof Fasteners

    • #12 for insulation attachment to wood and steel roof decks, available in Phillips drive or hex head
    • #14 for insulation and membrane attachment to wood, steel and structural concrete roof decks
    • #15 for insulation and membrane attachment to wood, steel and structural concrete roof decks
    • Factory Mutual and Miami-Dade County approvals
    • Standard gray e-coat coating provides compatibility with white, galvanized or gray deck undersides
    Product Item Application
    For insulation attachment to wood and steel roof decks;
    FM and Dade Co. Approved
    For insulation attachment to wood and steel roof decks;
    FM and Dade Co. Approved
    For insulation and membrane attachment to wood, steel and
    structural concrete roof decks; FM and Dade Co. Approved
    For insulation and membrane attachment to wood, steel and
    structural concrete roof decks; FM and Dade Co. Approved
    For membrane attachment to wood and steel roof deck;
    FM and Dade Co. Approved
    • Available in 2-7/8″ hex plate or 3″ round sizes
    • Flat bottom provides for use on rigid board surfaces
    • Metal plates are stacked for ease of use
    • Factory Mutual / Miami-Dade County approved

    Membrane Stress Plates

    • Available in 2″ and 2-3/8″ round sizes
    • Engineered barb design creates maximum wind uplift rating
    • Stacked for ease of fastening pattern
    • Factory Mutual / Miami-Dade County approved
    Product Item Application
    For insulation using Dekfast #12, #12 Hex, #14, #15, Dekspike™,
    Deklite™, and T.P.R.; FM and Dade Co. Approved
    For membrane using #14, #15, K-Fast, Dekspike, and T.P.R.;
    FM and Dade Co. Approved
    Stacked insulation and membrane plates used with IF 160 system;
    FM and Dade Co. Approved
  • Assemblies

    • System ES insulation assemblies, when installed with Stealth tools, increase productivity up to 30% and allow the contractor to install the roof assembly in a more ergonomically correct position versus standard installation methods
    • #12 Phillips or Hex head assembled with round galvalume plate
    • Screw and plate relationship is perpendicular every time, allowing for proper and quicker installation
    • Pre-assembled fasteners can be placed on the deck or loaded into the Stealth installation tools, giving the contractor the ability to use crew members in other areas of the roof project
  • Belted Systems

    The isofast® installation system, using collated fasteners and plates, is the fastest way to install roofing fasteners

    • Reduces installation costs up to 50%
    • Displaces labor costs
    • Belted fasteners and plates increase productivity and allows the contractor to install the roof assembly in an upright position when using the IF160 or IF240 installation tool
    • #12 belted Dekfast  for insulation attachment
    • #15 Dekfast for membrane attachment
    • isofast ® plates are stacked for easy loading into the isofast tool
  • Thermal Efficient Fastening Systems

    A complete system for attaching membrane and insulation

    • Reduces thermal bridging
    • Conserves energy
    • Lower cost alternative for attaching thick roof assemblies
    • Factory Mutual approved
    • Tool specifically designed to ensure proper installation
    • Low slope roof and cold storage construction
  • Nail Board Fasteners

    • Insulation panel fastener for use in vented and/or composite nailboard applications
    • No plates necessary
    • 5/8″ oversized head reduces fastener patterns
    • Standard gray e-coat coating provides compatibility with white, galvanized or gray deck undersides
  • Specialty Products

    Wide product offering of fasteners to address the unique needs of retrofits, special substrates and problematic roof decks

    Products include:

    • Deklite nylon auger
    • Dekspike structural concrete roofing anchor
    • Stainless Dekfast for corrosive environments
    • Purlin fastener
    • T.P.R. Peel rivet for problematic roof decks
    • ZAC anchors for termination bar attachment
    • Zinc Nailins for termination bar attachment
    Product Item Application
    For lightweight roof decks, concrete, Tectum, and gypsum, for insulation and membrane attachment; FM and Dade Co. Approved
    For insulation and membrane attachment to structural concrete roof decks; FM and Dade Co. Approved
    For attachment of insulation and membrane roof covers in a corrosive environment
    For retro-fit roofing systems to penetrate heavy-gauge purlin
    For insulation and membrane attachment to problematic roof decks
    For use in vented and/or composite nailboard applications.
    For fastening termination bar at wall terminations
    For fastening termination bar at wall terminations
    Attachment of insulation to substrates
    Base sheet, recovery board and insulation to concrete, structural wood fiber and poured Gypsum.
  • Termination Products

    Termination and batten bars for wall termination application.

    • Manufactured from specially extruded aluminum without sharp edges
    • Reinforced strengthening ribs allow for use in high wind applications
    • Hole space at 6″ on center
  • Installation Tools

    isofast ® IF160 and IF240

    • Fastest way to install roofing fasteners
    • Reduces installation costs up to 50%
    • Used with isofast® plates and belted fasteners increases productivity and is ergonomically correct, allowing contractors to install the roof assembly in an upright position

    Stealth

    • Use with Dekfast pre-assembled fasteners
    • Increases productivity up to 30%
    • Allows contractors to install the roof assembly in a more ergonomically correct position versus standard installation methods
  • Heavy Timber Anchors

    System WT
    Double-threaded fasteners for the innovative assembly of timber components;  wood/timber connections

    System WS
    For multi-layer timber/steel joints with self-drilling dowels


  • Other products and services from SFS intec USA

    09-12-2011

    Architectural Fastening Systems | SFS Intec USA

    Austenitic stainless steel fastening systems providing maximum corrosion resistance and sustainability for commercial construction. Exposed and hidden fastening solutions for metal to metal, metal to wood, cladding panels to timber, aluminum or steel framework. SFS intec is committed to providing quality continuing education courses. Fastening systems for commercial flat roofing and membrane attachment.


    09-12-2011

    Business Solutions | SFS Intec USA

    Cost-saving – Our various solutions offer you the ability to maintain optimal stock levels, a reduction in the number of purchase orders issued, a reduction in freight costs and quick automatic transfer of important information.


    09-12-2011

    Panelmaster® Fastening System | SFS Intec USA

    Post frame building design requires attaching approximately seventy fasteners for every one hundred square feet of metal panel, which in the traditional method of installing fasteners, contractors bend down and drill each fastener by hand. The Panelmaster tool from SFS intec offers the Post Frame Industry an innovative solution to the traditional method of attaching metal panels.


    09-12-2011

    Service | SFS Intec USA

    When your order is taken by one of our customer service professionals, the order detail is electronically transferred immediately to the appropriate local Service Center for processing, packaging, and shipping. Customer service professionals have access to 100% of our inventory at all Service Center locations, and can order additional custom processing with a touch of a few keys.


    09-12-2011

    SFS Products | SFS Intec USA

    Products include metal construction fasteners, standing seam roof clips, ACM, MCM, and HPL panel fasteners, curtain wall fasteners, fasteners for timber connections, and a wide range of stainless steel fasteners for sustainable roofing and wall panel applications.


    09-12-2011

    Weather Gard™ | SFS Intec USA

    Products are available for your ventilation, closure, sealant and flashing needs. ProfileVent ridge vent designed for commercial and residential metal roofs. WG-7 Closure designed to close gaps in roof and sidewall applications. Available in rolls pre-cut to fit most metal panel profiles. Hi-Rib profile for ease of handling and installation. Available in round or square base.