Products :: Natural Chemistry - phosfree

By: Natural Chemistry  09-12-2011
Keywords: Pool, Pool Water

Products :: Natural Chemistry


Per 10,000 gallons (38,000L)

Phosphate Level (ppb)  Phosfree 
 300 or less  16oz (0.5L)
600   32oz (1L)
 900 48oz (1.5L) 

How to Apply:

1. If pool has algae, follow dealer instructions to treat

2. Follow dealer instructions to balance water chemistry

3. Clean or backwash filter, if necessary

4. Determine required PHOSfree amount (see above chart)

5. SHAKE BOTTLE WELL, with filter running add required dose directly to the skimmer

-Note: If DE filter pressure rises above normal range, bump filter or if there is no bump option

turn filter off for a minimum of 30 seconds. Repeat either procedure until pressure remains

in normal range

6. Run filter 8 hours/day for 1 week or 48 hours continually without backwashing or cleaning

7. When phosphate levels are below 100ppb, start weekly dose of Pool Perfect+PHOSfree


Add 1L (33.9oz) at a time to DE & Cartridge filters to avoid increased filter pressure

It is important to retest phosphate levels after completion of a phosphate treatment. Repeat PHOSfree

treatment until phosphates are 100ppb

Features & Benefits:

The only patented phosphate remover that works on the filter

PHOSfree is formulated from lanthanum (rare earth compounds)

Will not cloud pool water

Keywords: Pool, Pool Water

Other products and services from Natural Chemistry


Products :: Natural Chemistry - scale free

Protects your pool from the damaging effects of scale build-up and staining due to. Can be used with any sanitizing system and is compatible with all pool surfaces. Following dosage chart, add recommended “initial dosage” of ScaleFree directly. If water hardness level is above 500ppm.


Products :: Natural Chemistry - filter perfect

Once contents of bottle have entered the filter- turn off pump and put valve in either. Remove cartridge elements or DE grids from filter tank and hose off loose material. In a pail, bucket or trash container with 5-10 gallons of water, add one 1L bottle. Add one 1L bottle of Filter Perfect to skimmer. Turn pump on with filter set to backwash.


Products :: Natural Chemistry - clear

Apply Clear at recommended dosage rate per gallons of pool water across pool. Water surface- concentrating on deep water areas.


Products :: Natural Chemistry - pool perfect phosfree

Check phosphates at least every month to make sure your phosphate level is. Each week, with filter running, add 1 capful per 8,000 gallons to skimmer. Chemical odors and eye irritation.