Products :: Natural Chemistry - filter perfect

By: Natural Chemistry  09-12-2011

Products :: Natural Chemistry

How to Apply:

Cartridge & DE

1. Remove cartridge elements or DE grids from filter tank and hose off loose material

2. In a pail, bucket or trash container with 5-10 gallons of water, add one 1L (33.9oz) bottle

of Filter Perfect

3. Place cartridge elements or DE grids in solution and soak for a minimum of

6 hours, preferably overnight

4. Remove from solution and rinse thoroughly after recommended time

5. Clean cartridge elements should be allowed to dry before reinstalling

Sand Filters

1. Have pump running and filter in backwash mode

- suction should come primarily from skimmer- not main drain

2. Add one 1L (33.9oz) bottle of Filter Perfect to skimmer

3. Once contents of bottle have entered the filter- turn off pump and put valve in either

close or filter position for a minimum of 6 hours

4. Turn pump on with filter set to backwash, run until water flows clear

- Do not allow pump to run dry

5. Return filter to normal operation


Use a weekly dose of Natural Chemistry’s Pool Perfect+PHOSfree or Spa Perfect to

further extend filter cycles and reduce maintenance

Features & Benefits:

Non-toxic, acid free formula

Powerful formula works on all filter types

Improves filter efficiency with longer filter runs

Easily disposed

Other products and services from Natural Chemistry


Products :: Natural Chemistry - scale free

Protects your pool from the damaging effects of scale build-up and staining due to. Can be used with any sanitizing system and is compatible with all pool surfaces. Following dosage chart, add recommended “initial dosage” of ScaleFree directly. If water hardness level is above 500ppm.


Products :: Natural Chemistry - clear

Apply Clear at recommended dosage rate per gallons of pool water across pool. Water surface- concentrating on deep water areas.


Products :: Natural Chemistry - pool perfect phosfree

Check phosphates at least every month to make sure your phosphate level is. Each week, with filter running, add 1 capful per 8,000 gallons to skimmer. Chemical odors and eye irritation.


Products :: Natural Chemistry - phosfree

If DE filter pressure rises above normal range, bump filter or if there is no bump option. It is important to retest phosphate levels after completion of a phosphate treatment. Add 1L at a time to DE & Cartridge filters to avoid increased filter pressure. With filter running add required dose directly to the skimmer. Follow dealer instructions to balance water chemistry. Follow dealer instructions to treat.