Painting

By: Gary Bourke's Painting  09-12-2011
Keywords: Painting

Painting

Your building is in need of the attention it hasn't had in years, or you need to repair the damage due to fire or water. You want to make a good impression so you want the job done right from start to finish - it is time to contact the real painting professionals. With over 35 years of experiences we will listen to what you want and provide you with what you need. A quality, problem free and attractive finish that will last.

Keywords: Painting

Contact Gary Bourke's Painting

Email - none provided

Print this page

Other products and services from Gary Bourke's Painting

09-12-2011

Concrete and Masonry Water Repellent

SEALTIGHT Acryseal Concrete and Masonry Water Repellent is a colourless, ready to apply concrete and masonry water repellent solution of methyl methacrylate co-polymers, a penetrating agent and a fast evaporating solvent. Water Repellents are used for weatherproofing and protection of virtually all types of above grade concrete and masonry, exposed aggregate and precast units.


09-12-2011

Epoxy

When using an epoxy coating on a floor it is important to removed all previously applied coatings and to access and repair old cracks and holes. Due to the complexity of the coating and the usual safety considerations involved it is best to have the coating professionally applied. Fill major cracks and control joints with flexible joint filler EXTRA5. Shot blast entire floor to remove failed coating and abrade floor2.


09-12-2011

Soda Blasting

Soda blastering removes very difficult soils like baked-on carbon, ink, paint, grease, grime, mold, surface rust and other oxides. Soda Blasting is used in.


09-12-2011

Shot Blasting

Gary Bourke's Painting or it?s technicians will NOT be held liable for any damage or inconvenience this may cause. Any objects on or near the floor to be blasted, which are fragile or valuable should be moved by the customer. EVERYONE coming within 20m feet of the shot blast machine must wear safety glasses. Our qualified technicians will hook-up to this electrical supply. The following are our requirements for our shot blast customers.


09-12-2011

Power Washing

The combination of hot water and power washing is a good way to clean concrete of dirt and mud stains,auto emissions, mold, mildew, or light stains in high traffic areas. This process provides a inexpensive beautification process where minimum abrasion cleaning is required.