Military suspensions and shock absorbers, Hydropneumatic and Semi-active Suspensions - newVehicleShockAbsorbers

By: Kinetics  09-12-2011
Keywords: shock absorber

1-3/4"

This is the smallest Shock Absorber in the product line, suitable for damping rates up to 225 lb-s/in, sustained temperatures up to 375°F, and tensile loading to 10,000 pounds. It is available, depending on endmount configuration, on a short lead time, and can be ordered as a basic unit, or with one or more of the following options or configurations, depending on your needs:

  • Hydraulic Recoil Cutoff to limit suspension extension
  • Hydraulic Compression Cutoff to limit suspension jounce

Applications

up to 2 ton trucks w/independent suspension
up to 10 ton trucks with live axles
up to 15 ton tracked vehicles

Keywords: shock absorber

Other products and services from Kinetics

09-12-2011

Military suspensions and shock absorbers, Hydropneumatic and Semi-active Suspensions - newTensioners

Should substantial debris become entrained between the track and related components, our tensioner will over-travel and collapse under a relatively low force to prevent over-tensioning of the track. As slack is removed from the track, the tensioner produces a gradually increasing force until it reaches its nominal position. Here the tensioner produces rapidly increasing forces to resist the maximum expected tractive effort without undue motion.


09-12-2011

Military suspensions and shock absorbers, Hydropneumatic and Semi-active Suspensions - newBearings

Shock Absorber end mount bearings are a serviceable part and replacing the bearings can add significant life to the shock absorber. General Kinetics decided long ago to better control quality and cost, by manufacturing thebearings ourselves. We make the following shock absorber mounting bearings in house.


09-12-2011

Military suspensions and shock absorbers, Hydropneumatic and Semi-active Suspensions - newHydropneumatics

When integrated into an on-board hydraulic system, hydropneumatic suspensions can even be used to lift individual wheelstations to mitigate battle damage or facilitate maintenance. Applications Current light armored vehicles Future main battle tanks, armored personnel carriers & self-propelled howitzers. The nitrogen charge is contained in a hollow piston rod, separated from the damping fluid by a floating piston.


09-12-2011

Military suspensions and shock absorbers, Hydropneumatic and Semi-active Suspensions - newEnhancements

GK?s Air Shocks integrate a COTS air spring with one of our military-grade dampers to provide a full modular suspension unit ready to be plugged in to your vehicle, and operate from your vehicle?s standard compressed air system. Available as an enhancement to any of our product lines, including our semi-active damping systems, coilover shock absorbers are the cost-effective, COTS solution to the loss of mobility that accompanies add-on armor.