Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck platform

By: Durabody  09-12-2011
Keywords: Truck Bodies, Laminated Hardwood, Acrylic Urethane,

Platform / Stake Truck Bodies



Standard Equipment

  • Lengths from 8'.
  • Width 96" - 102" nominal O.D.
  • Longsills 6" structural channel, gusseted.
  • Cross-members 3" structural channel, 12" on center.
  • Rub-rail Structural angle 5" x 3- 1/2" x 1/4" each side and rear, Installed flush with floor.
  • Stake Pockets, uniform pre-punched industry standard for racks each SIDE and REAR.
  • Floors, 1-3/8" Laminated Hardwood plank with one coat of boiled linseed oil.
  • Lights, Clearance lights to CMVSS 108 mounted at 45 degrees in a protective steel fabricated bracket c/w reflectors.
  • Paint, All units sandblasted and prepared before application of Sherwin-Williams GENESISTM acrylic urethane paint.
  • Unit thoroughly undercoated.
  • Installation on chassis included.
  • Mud Flaps, One pair of heavy duty "Durabody" flaps.

Typical Options

  • Special lengths available.
  • Width from 90" and 102" Nominal OD Available.
  • Longsills of varied heights and strengths available for specific applications.
  • Extended crane support sill structures.
  • Cross-members 4" "I" Beam available for extra heavy duty requirements.
  • Rub-rail Reversed on customer preferred side to provide winch track clearance over wheels and full deck length winch utilization.
  • Exterior pockets with 3/8" x 2" rub/tie rail and space bars.
  • Floors, 1/4" smooth or checker-plate steel, various thickness smooth and checkerplate steel overlays available.
  • Headboards of Fabricated 12 Ga Solid steel.
  • Combination screen and solid steel as required.
  • Multi purpose boom support structures as required.
  • Panel boxes for specialty plywood products.
  • Bumpers 3" and 5" heavy duty "U" shaped integrally connected to truck frame.
  • Screen mesh windows, ladders, tarp structures and tarps.
  • Rack "Kits" using drop in plywood panels and bows structures with fitted tarpaulins.
  • Stake racks with top and bottom cap protection channel over 3/4" Crezon-faced plywood.
  • Tie down chains, rings and rails, pipe sockets.
  • Underbody toolboxes with positive recessed lock and key.
  • Lumber rollers.
  • Hoists, front mount and underbody.
  • Pintle hooks up to 80,000 lbs Gross towed trailer weight.
  • Back-up alarms.
  • Mid turn signals.
  • Additional Chassis/Frame modifications optionally available.

Keywords: Acrylic Urethane, clearance lights, Laminated Hardwood, Truck Bodies,

Other products and services from Durabody

09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck frp

WALLS 3/4" white FRP Corrosion resistant lower rail connection design. CRASH ANGLE formed 16" x 3" bolted to floor and front bolster. No interior fasteners at the floor line to snag pallets. Under-ride bumpers and various protective features. STAINLESS corner posts, door frames, bumpers. REAR DOOR opening with R96DF Rollup door. 2 aluminum on rear door frame.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck curtainside

Large TRIANGULAR steel reinforcing corner gussets with nylock nuts distribute racking stresses through the entire roof structure. Stainless fasteners, inside thrust washer pads prevent curtain fasteners from pulling through the curtain material. Winch tracks, winch straps, tie rails, heavy duty floor "D" rings. ALUMINUM HD 6061-T-6 EXTRUDED self cleaning curtain top rail. LED lights or grommet mount sealed lights.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck aluminum

BODY PANELS 0.040" pre-painted white aluminum riveted 3" c/c to 1-1/2" "Z" posts on 24" centres. Lower rail fasteners stainless with Mylar electrolysis barrier tape on lower rail connections. FRONT ATTACH PLATES welded to sub frame on the first member to retain the lower bulkhead. Aluminum or FRP swing or Roll-up doors,, stainless door rivets, 3 and 4 piece doors.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - products main

Being situated in one of the most beautiful and fertile farming communities outside of any major center, Durabody Industries Limited has always been sensitive to the need for clean air and water for the healthy growth of crops and the promotion of our green eco-systems.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck bodies

With the addition of a front wall, roof, curtain side walls and rear doors to the platform type of truck body, delicate cargo can be enclosed and protected from the elements without the operator having to struggle with tarpaulins in inclement weather. Given the application and load requirements that the product is expected to operate under, Durabody can design the most suitable configuration for your truck to do the job at hand.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck insulated

Insulation, urethane foam in place in walls and ceiling per application requirements. Isolated tubular steel to support reefer. 4" urethane foam in place under floor. Drain holes c/w self sealing hoses.