Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck insulated

By: Durabody  09-12-2011
Keywords: Aluminum, Truck Bodies

Insulated Truck Bodies



Standard Equipment

  • Insulation, urethane foam in place in walls and ceiling per application requirements.
  • Insulation, 4" urethane foam in place under floor.
  • Floor, aluminum checker plate.
  • Drain holes c/w self sealing hoses.
  • Lining, various interior:plywood, one piece white glassboard (U.S.D.A. approved) or galvanized steel.
  • Reinforcements, Isolated tubular steel to support reefer.
  • Reefer servicing package.
  • Various door configurations including insulated roll-up doors.

Typical Options

  • Chassis/Frame modifications.
  • Floor, steel checker plate.
  • Floor "Inverted T" aluminum.
  • Walkramps 10' - 16'.
  • Double fold out safety grip steps.
  • Cargo securing devices.
  • Tailgate loaders to 6,000 lbs. capacity.
  • Back-up alarms.
  • Mid-turn signals.
  • Bulkheads for mixed cargo and cold requirements.
  • Vinyl U.S.D.A approved strip curtains.
  • Floor, aluminum or steel "Bathtub".
  • Reefer duct floors c/w solid end caps, welded and sealed.
  • Meat rail or Dole plate applications available.
  • Up to 5" urethane foam in place in walls.

Keywords: Aluminum, Truck Bodies

Other products and services from Durabody

09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck frp

WALLS 3/4" white FRP Corrosion resistant lower rail connection design. CRASH ANGLE formed 16" x 3" bolted to floor and front bolster. No interior fasteners at the floor line to snag pallets. Under-ride bumpers and various protective features. STAINLESS corner posts, door frames, bumpers. REAR DOOR opening with R96DF Rollup door. 2 aluminum on rear door frame.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck curtainside

Large TRIANGULAR steel reinforcing corner gussets with nylock nuts distribute racking stresses through the entire roof structure. Stainless fasteners, inside thrust washer pads prevent curtain fasteners from pulling through the curtain material. Winch tracks, winch straps, tie rails, heavy duty floor "D" rings. ALUMINUM HD 6061-T-6 EXTRUDED self cleaning curtain top rail. LED lights or grommet mount sealed lights.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck aluminum

BODY PANELS 0.040" pre-painted white aluminum riveted 3" c/c to 1-1/2" "Z" posts on 24" centres. Lower rail fasteners stainless with Mylar electrolysis barrier tape on lower rail connections. FRONT ATTACH PLATES welded to sub frame on the first member to retain the lower bulkhead. Aluminum or FRP swing or Roll-up doors,, stainless door rivets, 3 and 4 piece doors.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck platform

Floors, 1/4" smooth or checker-plate steel, various thickness smooth and checkerplate steel overlays available. Clearance lights to CMVSS 108 mounted at 45 degrees in a protective steel fabricated bracket c/w reflectors. Rub-rail Structural angle 5" x 3- 1/2" x 1/4" each side and rear, Installed flush with floor. Stake racks with top and bottom cap protection channel over 3/4" Crezon-faced plywood.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - products main

Being situated in one of the most beautiful and fertile farming communities outside of any major center, Durabody Industries Limited has always been sensitive to the need for clean air and water for the healthy growth of crops and the promotion of our green eco-systems.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck bodies

With the addition of a front wall, roof, curtain side walls and rear doors to the platform type of truck body, delicate cargo can be enclosed and protected from the elements without the operator having to struggle with tarpaulins in inclement weather. Given the application and load requirements that the product is expected to operate under, Durabody can design the most suitable configuration for your truck to do the job at hand.