Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck frp

By: Durabody  09-12-2011
Keywords: Aluminum, Truck Bodies, Heat Shrink

FRP Truck Bodies



Standard Equipment

  • WALLS 3/4" white FRP Corrosion resistant lower rail connection design.
  • Stainless Rub-rail I fasteners. Mylar separator electrolysis barrier tape on bottom rail connections.
  • 6061-T-6 aluminum alloy extrusions.
  • REAR DOOR opening with R96DF Rollup door.
  • REAR FRAME 11 ga. GALVANNEAL boxed HSLA steel. Welded shockplates.
  • GRAB HANDLES, 2 aluminum on rear door frame.
  • Flush sill entrance. Built in drain trough.
  • INTERIOR WIDTH =100" wall-to-wall. No interior fasteners at the floor line to snag pallets.
  • SCUFF PLATE 1/8 " thick RMS 12" high.
  • CRASH ANGLE formed 16" x 3" bolted to floor and front bolster.
  • ROOF One piece .032" stretched, urethane bonded to pre-arched "I"-Beam aluminum bows 24" c/c, rivets 2" c/c.
  • AERO-DYNAMIC fuel saving 10" radius top front, 5" radius front corner posts.
  • Sills 5" structural channel gusseted every second cross member.
  • Cross members 4" pre-waxed, black undercoated I-Beams with #80,000 yield material 12" o/c welded to "J" rail.
  • FLOOR 1-3/8" pre-undercoated laminated hardwood with 2 screws per board per cross-member floorboards coated with boiled linseed oil.
  • Black rubber flaps (PR).
  • HUCK (Vinyl encapsulated white head) bolts used through corners and FRP connections.
  • INTERIOR DOME LIGHTS, surface mounted and comes with a cab switch.
  • CLEARANCE LIGHTS Grote plug-in light system to CMVSS 108 standard.
  • Silicone rich heat shrink tube, di-electric grease.
  • AFTERFRAME as required.
  • Black undercoat on under-structure.
  • 1 year DURABODY warranty included.

Typical Options

  • Transparent roofs. STAINLESS corner posts, door frames, bumpers.
  • Load "cargo" track. Scuff liners of corrugated steel, bonded FRP or laminated hardwood boards. Various heights.
  • Steel and aluminum floors. Insulation packages, plywood and KEMLIGHT liners.
    Refrigeration openings.
  • DOORS, 7/8" FRP. 3 aluminum hinges, picture frame aluminum extrusions.
    Neoprene hollow compression seals.
  • Side door, full height 2 hinges, galvanneal thin profile frame, 42" x 80" with step.
    Continuous bar-lock.
  • Roll-up doors. Dry freight or insulated, stainless door rivets. 3 and 4 piece bi-fold doors, extra locks.
  • Tuk-under and "rail" gate loaders. Eyelevel post mounted tail-light brackets.
  • Under-ride bumpers and various protective features.
  • THRESHOLD PLATE 24" x 96" of 12 ga. steel routed flush.
  • BUMPER Heavy Duty "U" shaped 5" structural channel HARDWOOD FILLED.
  • Insulation packages. KEMLIGHT .090" thick interior fiberglass USDA approved lining.
  • Crash plates, 16"-24" Threshold treadplates of 12"-48".
  • Extra Cross members in rear entrance or high load areas.
  • Rubber dock bumpers, steps. grab handles, ventilators, heaters, coolers. belly boxes, Nosecones. Placards and "CONSPICUITY" tape.
  • Premium paint packages, striping, decals.

Keywords: Aluminum, Barrier Tape, Black Rubber, clearance lights, Fuel Saving, Heat Shrink, Interior Dome, Laminated Hardwood, Light System, Scuff Plate, Truck Bodies,

Other products and services from Durabody

09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck curtainside

Large TRIANGULAR steel reinforcing corner gussets with nylock nuts distribute racking stresses through the entire roof structure. Stainless fasteners, inside thrust washer pads prevent curtain fasteners from pulling through the curtain material. Winch tracks, winch straps, tie rails, heavy duty floor "D" rings. ALUMINUM HD 6061-T-6 EXTRUDED self cleaning curtain top rail. LED lights or grommet mount sealed lights.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck aluminum

BODY PANELS 0.040" pre-painted white aluminum riveted 3" c/c to 1-1/2" "Z" posts on 24" centres. Lower rail fasteners stainless with Mylar electrolysis barrier tape on lower rail connections. FRONT ATTACH PLATES welded to sub frame on the first member to retain the lower bulkhead. Aluminum or FRP swing or Roll-up doors,, stainless door rivets, 3 and 4 piece doors.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck platform

Floors, 1/4" smooth or checker-plate steel, various thickness smooth and checkerplate steel overlays available. Clearance lights to CMVSS 108 mounted at 45 degrees in a protective steel fabricated bracket c/w reflectors. Rub-rail Structural angle 5" x 3- 1/2" x 1/4" each side and rear, Installed flush with floor. Stake racks with top and bottom cap protection channel over 3/4" Crezon-faced plywood.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - products main

Being situated in one of the most beautiful and fertile farming communities outside of any major center, Durabody Industries Limited has always been sensitive to the need for clean air and water for the healthy growth of crops and the promotion of our green eco-systems.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck bodies

With the addition of a front wall, roof, curtain side walls and rear doors to the platform type of truck body, delicate cargo can be enclosed and protected from the elements without the operator having to struggle with tarpaulins in inclement weather. Given the application and load requirements that the product is expected to operate under, Durabody can design the most suitable configuration for your truck to do the job at hand.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck insulated

Insulation, urethane foam in place in walls and ceiling per application requirements. Isolated tubular steel to support reefer. 4" urethane foam in place under floor. Drain holes c/w self sealing hoses.