Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck curtainside

By: Durabody  09-12-2011
Keywords: Aluminum, curtain, Truck Bodies

Curtainside Truck Bodies



Standard Equipment

  • Standard DURABODY Platform construction.
  • 6" structural channel long sills.
  • Side rails 6" structural channel.
  • FLOOR, pre-undercoated, laminated 1-3/8" hardwood. 2 screws per board per cress member.
  • FRONT FRAME; 4" x 2" hollow structural tube. SQUARE FRONT. Fast attach front anchor pocket.
  • Gear box front curtain tensioner. Grease fittings. "no- backlash" gears.
  • 98" REAR DOOR opening, 4" x 2" tube. Reinforcing knee angles. Simple rear curtain attachment.
  • ALUMINUM HD 6061-T-6 EXTRUDED self cleaning curtain top rail.
  • 5" vinyl PELMET curtain seal.
  • Large TRIANGULAR steel reinforcing corner gussets with nylock nuts distribute racking stresses through the entire roof structure.
  • 0.040" aluminum roof skin bonded to 1-1/2" I-Beam 6061-T6 aluminum pre-cambered roof bows on 24" c/c.
  • 28 oz vinyl curtains standard. Welded joints, 2" seat belt reinforcing web straps at 2' intervals.
  • Grab hook anchors lower heat sealed curtain edge.
  • ROLLERS, self centring "NYLO-GLIDE" tapered wheel, reducing wear on aluminum track.
  • STAINLESS fast opening lower over-centre cam buckles on 24" c/c . Stainless fasteners, inside thrust washer pads prevent curtain fasteners from pulling through the curtain material.
  • PILLARS: Over centre 1-1/2" square tube. (Quantity dependant on length).
  • CLEARANCE-LIGHTS, SEALED with silicone-rich shrink tube. Meets CMVSS specifications.
  • Cross members undercoated.
  • 2" reflective CONSPICUITY tape.
  • Sherwin-Williams GENESISTM acrylic urethane paint on sand blasted, primed structural metal.
  • 1 year DURABODY warranty included.

Typical Options

  • 4" I-Beam, 80,000 yield light weight cross-members.
  • Extra support pillars.
  • "C" channels welded to pillars to provide light duty rack kit concept.
  • Winch tracks, winch straps, tie rails, heavy duty floor "D" rings.
  • FRP Translucent roof sheet in place of aluminum for increased interior daylight.
  • U-bumpers, Crash plates, 16" - 24", Threshold plates 12" - 48".
  • FRP swing or Roll-up doors. STAINLESS Roll-u door rivets. Double lock rods, Extra hinges.
  • LED lights or grommet mount sealed lights, Dome lights.
  • CURTAINS in other OPTIONAL shades (Subject to availability. Check before ordering.)
  • STAINLESS front and rear end frames.
  • Nosecone, rubber dock bumpers.
  • Special and Urethane paint packages, striping. Aluminum and steel tool/belly boxes.
  • Placards, tailgates.

Keywords: Acrylic Urethane, Aluminum, curtain, Threshold Plates, Truck Bodies,

Other products and services from Durabody

09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck frp

WALLS 3/4" white FRP Corrosion resistant lower rail connection design. CRASH ANGLE formed 16" x 3" bolted to floor and front bolster. No interior fasteners at the floor line to snag pallets. Under-ride bumpers and various protective features. STAINLESS corner posts, door frames, bumpers. REAR DOOR opening with R96DF Rollup door. 2 aluminum on rear door frame.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck aluminum

BODY PANELS 0.040" pre-painted white aluminum riveted 3" c/c to 1-1/2" "Z" posts on 24" centres. Lower rail fasteners stainless with Mylar electrolysis barrier tape on lower rail connections. FRONT ATTACH PLATES welded to sub frame on the first member to retain the lower bulkhead. Aluminum or FRP swing or Roll-up doors,, stainless door rivets, 3 and 4 piece doors.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck platform

Floors, 1/4" smooth or checker-plate steel, various thickness smooth and checkerplate steel overlays available. Clearance lights to CMVSS 108 mounted at 45 degrees in a protective steel fabricated bracket c/w reflectors. Rub-rail Structural angle 5" x 3- 1/2" x 1/4" each side and rear, Installed flush with floor. Stake racks with top and bottom cap protection channel over 3/4" Crezon-faced plywood.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - products main

Being situated in one of the most beautiful and fertile farming communities outside of any major center, Durabody Industries Limited has always been sensitive to the need for clean air and water for the healthy growth of crops and the promotion of our green eco-systems.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck bodies

With the addition of a front wall, roof, curtain side walls and rear doors to the platform type of truck body, delicate cargo can be enclosed and protected from the elements without the operator having to struggle with tarpaulins in inclement weather. Given the application and load requirements that the product is expected to operate under, Durabody can design the most suitable configuration for your truck to do the job at hand.


09-12-2011

Durabody Industries Ltd. | Manufacturer of Truck Bodies and Trailers - truck insulated

Insulation, urethane foam in place in walls and ceiling per application requirements. Isolated tubular steel to support reefer. 4" urethane foam in place under floor. Drain holes c/w self sealing hoses.