Insulated Concrete Forms for Walls

By: Renfrew Agri Systems  09-12-2011
Keywords: Walls, Ties, Concrete Forming

Build unlimited wall widths, many different insulation values, corners, angles, T-walls, columns, pilasters, brick ledges, and radius walls, using just a few standard components.

Panels made of Expanded Polystyrene (EPS) and Ties made of High Density Polyethylene (HDPE) create a Concrete Form that will accommodate vertical and horizontal Reinforcing Steel as required.

Filling the cavity with concrete will create solid concrete walls with 2-4 hour Fire Resistance Ratings (FRR). The EPS Forming System will stay in place and turn into the best insulation available today, saving you energy costs for the lifetime of the building.

Temporary bracing is usually required for vertical and horizontal alignment only.

Six different standard wall widths are available (nominal concrete widths of 14" [350mm], 12" [300mm], 10" [250mm], 8" [200mm], 6" [150mm], and 4" [100mm]) and can be combined with the Quad-Lock Extender Tie to add 12" [305mm] to any standard cavity size.

The Quad-Lock System encompasses these components:

These components allow assembly of all concrete forming for your walls, including corners, arches, any angles, columns and pilasters, as well as T-Wall connections. Transport and storage costs of Quad-Lock are substantially lower compared to pre-assembled block systems. Ordering and keeping track of inventory is easier (you would need at least 45 different parts to do the same with pre-assembled blocks). The Excelâ„¢-based Quad-Lock Estimating program makes it quick and easy to calculate all materials needed for your job and the cost.

Keywords: Concrete Forming, Concrete Walls, Ties, Walls

Contact Renfrew Agri Systems

Email - none provided

Print this page