Air Nozzles Informations

By: STREAMTEK  09-12-2011
Keywords: Compressed Air, Air Nozzles, Air Nozzle

INSTALLATION & MAINTENANCE


What is an Air Nozzle?

An Air Nozzle is a simple low cost solution to diminish noise levels and more importantly save you money by reducing excessive air consumption on compressed air blowoff operations. They are ideal for anything from multi-unit nozzle manifolds for conveyorized products of transfer lines to your standard hand-held blowoff gun.

Why Air Nozzles?
Replace open copper tubes, pipes and plastic nozzles with STREAMTEK Air Nozzles and compressed air savings can be as high as 80%! The less compressed air that is used essentially means less noise. Noise reduction up to 10-15 dBA is typical. Ohh and yes, did we mention that our Air Nozzles meet Occupational Safety and Health Administration (OSHA) maximum dead ended pressure requirements?

Did you know?
A 1/4” (6mm) open ended copper tube will output up to approximately 40 SCFM (Standard Cubic Feet per Minute) – 1133 SLPM! This is equivalent to the total output of an 8-12 horsepower air compressor. The static pressure requirements set by OSHA will be compromised when the supply pressure of an open pipe, tube and/or drilled holes surpasses 30 PSIG (2 BAR). In addition, the noise levels will often reach well above 95 dBA. STREAMTEK Air Nozzles & Air Jets address all of these issues!

Keywords: Air Nozzle, Air Nozzles, Compressed Air, Copper Tubes

Other products and services from STREAMTEK

09-12-2011

Air Operated Products - StreamTek Corp

STREAMTEK Corporation manufactures a wide variety of low cost industrial compressed air products for drying, cooling, blowoff, cleaning, conveying, static elimination and industrial housekeeping.


09-12-2011

Air Nozzles & Jets - STREAMTEK Air Nozzles & Jets

Air Jets on the other hand are larger than nozzles and are used when a wider area needs to be hit with the amplified air. Reduce both noise levels and excessive air consumption for various compressed air blowoff operations. STREAMTEK Air Jets and Nozzles produce air flows up to 25x the compressed air consumed. This High Velocity high force Air Jet is an ideal choice for chip removal.


09-12-2011

Air Amplifiers - STREAMTEK Hi-Temp & Adjustable Air Amplifiers - high velocity air jet information

Fully Adjustable Unlike some competitive Air Jets, the STREAMTEK High Velocity and High Flow Air Jets do NOT use cheap plastic shims to alter your air consumption, flow, force and vacuum. This high velocity high force air jet is commonly used for chip removal, part ejection and part drying. The STREAMTEK High Velocity Air Jet will provide you with absolute. Maximum thrust with a confined, directed stream of air.


09-12-2011

Air Amplifiers - STREAMTEK Hi-Temp & Adjustable Air Amplifiers - high flow air jet information

Fully Adjustable Unlike some competitive Air Jets, both STREAMTEK High Flow and High Velocity Air Jets do NOT use cheap plastic shims to alter your air consumption, flow, force and vacuum. Instead our Air Jets are all made adjustable with a lock-ring to ensure the security of virtually any gap setting you require. The STREAMTEK High Flow Air Jet system is typically used in cooling and light blowoff applications.