Corrosion Testing Equipment

By: Ofite  09-12-2011
Keywords: Weight Loss, Drilling Fluids, Drilling Fluid

Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the fluid system. Pre-weighed corrosion rings are the most effective way of measuring the corrosivity of the drilling fluid and the benefits of any treatment. Corrosion rings, made from metal similar to that used to make drill pipe, are sized to fit into the relief groove in the tool joint box. After exposure in the system (usually for a minimum of 80 hours), the rings are retrieved, cleaned, and re-weighed to within 1/10 milligram. The weight loss is attributed to corrosion and is calculated and reported as lb/ft2/yr or mils per year (MPY). For best results, rings should be re-weighed as soon as possible after removal from the system and may be returned to OFITE for weighing and analysis. OFITE inventories a complete selection of drill pipe corrosion rings to fit most sizes of drill pipe, and each ring size is listed in order of best fit.

Corrosion coupons (flat and rod shaped) are mounted on the appropriate coupon holder and usually placed inside an aging cell, but sometimes directly in the flow line at the rig site. Testing is based upon the same principles as the corrosion rings. A simple formula gives a corrosion rate per year.

Keywords: Drilling Fluid, Drilling Fluids, Electrochemical Reaction, Ring Size, Tool Joint, Weight Loss,

Other products and services from Ofite

09-12-2011

Drilling Fluids Testing Equipment

From multi-unit HTHP filter presses to our one-of-a-kind Dynamic Linear Swell Meter, our drilling fluid product line is top notch. We know when laboratory data is requested that it is frequently urgent and in many cases was needed "yesterday". Browse our complete catalog of drilling fluids testing equipment broken down by category in the left side bar. OFITE offers a wide variety of products for use in field and lab testing drilling fluids.


09-12-2011

Cement Testing Equipment

Many of our engineers and technicians have been employed by other operators or service companies and have considerable experience in the field and laboratory environments. We know that when data is requested that it is frequently urgent and in many cases was needed "yesterday..


09-12-2011

Core Testing Equipment

All of the equipment found in this section was especially designed by our engineering department at the request of our customers. OFITE provides a variety of core testing equipment.


09-12-2011

Services

OFITE employs experienced personnel to service and repair equipment manufactured by us. Caracterizacion de Particulas Ostos & Ostos. 1, Nagibina St., Omsk, Russia, 644033. OFI Testing Equipment – Singapore.