Octave Audio - Tone Arms from Ortofon

By: Octave A Audio Us  09-12-2011
Keywords: Pricing Information

Tone Arms

Ortofon now introduces tone arms to the North American market. There are two lines:

  • Static tone arms: AS-212-S and AS-309-S
  • Dynamic tone arms: RS-212-D and RS-309-D

Information about static tone arms :

  • AS-212S(9”) from pivot to stylus
  • AS-309S(12”) from pivot to stylus
  • S shape tone arms developed for the Ortofon cartridges
  • SME connection for SPU and head shell
  • Adjustable antiscating(0 to 5 gram)
  • Overhang is 15mm
  • Offset angle is 22°
  • Adjustable tone arm height
  • Optional counterweight for heavier cartridge between 26 and 38 grams (SPU) is available

Information about dynamic tone arms :

  • 9 and 12 inch, with dynamic balance graduated vertical tracking force (VTF) control through a new spring design.
  • The new short wire spring, housed in the pivot case, eliminates unwanted vibrations in the tone arm.
  • VTF in the range 0-5 grams can be precisely adjusted by means of the supplied digital force gauge.
  • Anti-skate control adjusted by calibrated dial in the range 0-5 gram.
  • Tone arm height, and thereby VTA, is easy adjustable on the tonearm base.
  • Detachable head shell and tone arm cable, with standard SME-type connectors.
Pricing Information

AS-212S$1599 usd

AS-309S$1699 usd

RS-212D$2299 usd

RS-309D$2399 usd

The information in this article was current at 06 Dec 2011

Keywords: Pricing Information

Other products and services from Octave A Audio Us

09-12-2011

Octave Audio - Plinths

Our "Solid Design" plinth was developed to satisfy demands for a massive plinth which could deliver real sonic improvements (NOT the case with many of the replacement plinths we've encountered, which are sonically detrimental to the TD 124's performance). Replacing the plinth is simple - just lift the chassis out of the original and place it in the new one, making sure that the rubber mushrooms and their metal supports are correctly seated.


09-12-2011

Octave Audio - Main Platter Bearing with Shaft

From the standpoint of decoupling, this is an excellent solution, but the combination of the heavy rotational force of the drive system and insufficient tolerances of the supplied parts inevitably resulted in extensive wear. The set includes a complete main platter bearing with shaft, an addtional replacement bearing thrust plate and oil gasket und a bottle of Thorens oil.


09-12-2011

Octave Audio - Hardenet Alloy Upper Platter

After experimenting with various casting and machining properties, extensive sonic tests led us to eventually choose a much harder aluminium alloy, more difficult to shape and machine than the original but delivering improved sonic performance. Our goal, as always, was to produce a "new vintage" product which respects the sonic, mechanical and aesthetic properties of the original Thorens part while offering advances in sound quality.


09-12-2011

Octave Audio - TD 124 Tonearm Boards

The shape of the 12" armboard has been expressly designed for resonance control, bringing with it substantial sonic improvements. Our replacement armboards for the TD 124 are hand made from select beech by Swiss craftsmen. Carefully adjust the tonearm according to the manufacturer's instructions. Taking care not to forget all grounding wires. Octave Audio - TD 124 Tonearm Boards.


09-12-2011

Octave Audio - Non Magnetic Main Platter

Our replacement platter is manufactured from raw materials chosen without compromise, followed by state-of-the-art casting, precision machining and finishing and faithful reproduction of the original strobe markings, all carried out by the finest Swiss specialty firms. Thorens chose cast iron for the TD 124 series due to its outstanding properties: high density and damping capacity, great rigidity and extraordinary dimensional stability.


09-12-2011

Octave Audio - Moving Coil Cartridges

Many of the first generation of moving coil cartridges were low impedance and low output units which demanded a transformer or a comparable step-up device. Some of today's most exclusive moving coil designs still deliver the ultimate in analogue sound quality through a specially developed matching transformer. Each of the four coils contains between 11 an 24 turns of wire, depending on model, and has to be wound by hand under a microscope.


09-12-2011

Octave Audio - Motor E 50 MK I / MK II Conversion Kit

This was recognized early on by Thorens, and accounts for the differences in motor decoupling between the TD 124 Mark I and Mark II models. Correct decoupling of the motor from the chassis is a key element in any turntable design. The motor suspension rods were lengthened and additional damping devices. Motor E 50 MK I / MK II Conversion Kit.