American Engineering Network, Inc., - Services

By: American Engineering Network  09-12-2011
Keywords: Finite Element Analysis

HYDRAULIC DESIGN
WE CAN PROVIDE STANDARD OR CUSTOM DESIGNED CIRCUITS.

Key Benefits

  1. Use our 23 years of experience to design the best system.
  2. Obtain parallel engineering.
  3. Then let us teach you how to accomplish the design for the next time.

Capabilities

We have standard designs ready to perform most hydraulic functions.

OR

We can develop custom designs to fit your requirements.

HYDRAULIC HARDWARE
WE CAN PROVIDE THE COMPLETE SYSTEM INCLUDING THE TANK, OIL, ETC. OR, WE CAN PROVIDE PARTIAL SYSTEMS, SUCH AS MANIFOLDS, FILTERING SYSTEMS,ETC.

Key Benefits

  1. Let us be responsible for making the system perform.
  2. One year warranty on all parts and labor.
  3. We will work closely with your personnel to make sure it's right.
  4. AEN, Inc can replace pumps, motors, valves of all brands.
  5. We are an authorized parts and service center for Colly-Bombled pressbrakes and shears.

Capabilities

We can supply a complete system, including the tank with motors, filters and spare parts, or we can supply components or manifolds.



HYDRAULIC MAINTENANCE

WE CAN PROVIDE COMPLETE PM, FROM CONTAMINATION ANALYSIS TO ON-SITE TROUBLESHOOTING.

Key Benefits

  1. We have 25 years of hydraulic experience.
  2. We can provide on-site analysis of your problems.
  3. We will work with your personnel to train them to perform standard maintenance.

Capabilities

During our years in the machine design, we have learned the hard way about contamination, faulty valves, broken wires, etc. We can teach your people how to keep your machines running longer with preventative maintenance.
Contact us and put us to the test.



MECHANICAL DESIGN
WE CAN PROVIDE COMPLETE MECHANICAL DESIGN, FROM SIMPLE WELDMENTS CONSISTING OF TWO PARTS TO COMPLEX FRAMES WITH MULTIPLE ITEMS. WE USE THE LATEST 3-D DRAFTING SOFTWARE, THEN WE CAN CHECK THE DESIGN WITH FINITE ELEMENT ANALYSIS FOR ENSURING THAT IT IS COST EFFECTIVE AND STRUCTURALLY CORRECT.

Key Benefits

  1. Our experience and resources will allow your company to shrink new design times.
  2. Using 3-D CAD, we can quickly check part fit.
  3. Integrated into our 3-D CAD is a finite element analysis that can check for structural integrity and give you the strongest design for the least amount of steel.

We have designed machines for gauging, for moving of heavy parts, such as dies and molds, and machines for light to heavy metal forming. Contact us and see what we can do for you!!!!



2-D OR 3-D DRAFTING
WE CAN PROVIDE COMPLETE GENERAL DRAFTING, USING PRO-ENGINEER. WE CAN PROVIDE 2-D FULLY DIMENSIONED DRAWINGS READY FOR MANUFACTURING ON YOUR FORMAT,OR FILE OUTPUT IN VARIOUS FORMATS.

Key Benefits

  1. Sometimes, you need a 3-D part or an exploded view for your customers.
  2. From experience, we know that 3-D helps your shop people understand better.
  3. We can be your temporary drafting help, but with experience.

Capabilities

We can e-mail sketches to several resources that can apply time to your needs quickly.
We can be your eyes with experience to possibly advise of issues that can be made better.

Contact us with your needs.



MOTION CONTROL
ALONG WITH HYDRAULIC DESIGN AND HARDWARE SUPPLY, WE ARE FULLY CAPABLE OF USING MOTION CARDS FROM DELTA TAU TO PROVIDE MOTION PROFILING OR POSITION CONTROL OF HYDRAULIC POWERED SYSTEMS. THE USUAL ACCURACIES ARE AS SMALL AS 0.0005". JUST CLICK HERE (MOTION CONTROL) AND LET US KNOW THE BASICS OF YOUR NEEDS.

Key Benefits

  1. This is a little understood issue with several design characteristics that require a knowledge of theory, ability to perform calculations that fit the job, knowledge to use the right components, and then the talent to make them perform.
  2. We can write the software that can perform all of the functions listed in Benefit 1 above.
  3. Then let us teach you how to accomplish the design for the next time.

Capabilities:

  1. We have controlled pressure, position, and speed to within 2 psi, 0.0005", and 1 inch per minute, respectively. These were for companies like Pratt & Whitney and Lawrence Livermore Laboratories.
  2. We have written software for several machines that accounted for oil viscosity due to temperature change, change in pressure drops, or load changes.
  3. We are considered one of the area's most knowledgeable people for Delta Tau and their products and software. Contact us and let us move your next job to an exact position for success.

MOVE QUICKLY, THEN STOP PRECISELY.



METAL FORMING CONSULTATION
WE CAN PERFORM ANALYSIS OF TONNAGE REQUIREMENTS OF V-DIE STYLE FORMING OR DRAW FORMING.

Key Benefits
Benefit 1: Use our 23 years of experience to broaden your choices.
Benefit 2: We have contacts or resources across the USA.

Capabilities

We can guide you in your choices of selecting the best machine for your job. Deep draw, V-die bending on pressbrakes, or punching/blanking, these are typical operations in which we have been involved.
Contact us and tell us about your system requirements.


OTHER SERVICES
IF YOU HAVEN'T SEEN A CATEGORY THAT DESCRIBES YOUR NEEDS, CLICK HERE (OTHER) AND TELL US WHAT YOUR SPECIAL NEEDS ARE. MAYBE WE CAN HELP.WE ARE ADDING SERVICES AND EXPERTISED EVERY DAY THAT MAY NOT BE UPDATED HERE ON THE WEB. OR, MAYBE WE HAVE OTHER CONTACTS WHO CAN HELP. REMEMBER, OUR GOAL IS TO HELP YOU.

Keywords: Finite Element Analysis

Contact American Engineering Network

Email

Print this page

Other products and services from American Engineering Network

09-12-2011

American Engineering Network, Inc. - Products

Sidebar Layout This content changes for each page or could be consistent for each section by using Library Items or Server Side Includes. The table is 200 pixels with 3 colums.