Sweetwater Metal Products Pipe Dispensing Trailers

By: Ah Mcelroy  09-12-2011
Keywords: Coil

A leader in design and innovation in the LDCPE pipe dispensing trailer industry.

Sweetwater Metal Products model CT2710C-LT-SL LDCPE pipe dispensing trailer meets or exceeds all the safety and quality requirements demanded by today's utility company and pipe installation contractor. The CT2710C incorporates many features to improve the handling, transporting, and dispensing of coiled pipe, which equates to substantial cost savings.

Features of the CT2710C-LT-SL LDCPE pipe dispensing trailer

  • McElroy LineTamer to straighten and reround the pipe - First designed and fabricated in our shops.
  • Coil is suspended from ID - Always stays vertical and indexed with tamer.
  • Powered adjustable Mast - Accepts different coil size's and allows pipe room to align.
  • Threading Rollers - Guides pipe into tamer and supports the pipe.
  • Self Loading - Self storing load arm. Built in powered hoist.
  • Loads vertical or horizontal coils.
  • Outriggers - Stabilize the trailer while loading coil.
  • Side Loading - Nothing to remove, just open the gate and hoist the coil in.
  • Totally Self Contained - Nothing else required. No reel required
  • Safety Cage - Protects workers from inadvertent release of coiled energy
  • Adjustable Side Gate - Adjusts to the width of the coil.
  • Hydraulic Power Unit - Gas driven.
  • Meets DOT regs. - Transport the trailer with coil loaded if required.
  • Requires only two workers to operate.
  • Structural Steel Tubing

Keywords: Coil

Contact Ah Mcelroy

Email - none provided

Print this page

Other products and services from Ah Mcelroy


Reed Tools

Reed Tools has invented tools that continually become industry standards, including the Quick ReleaseTM Tubing Cutter, various tools for plastic pipe, vises, plus Hinged and RotaryTM cutters for large diameter pipe. The Professional's Choice in Pipe Tools.


Internal Bead Trimmer II LD External Bead Trimmer

Sediment can build against a bead during a slow flow rate, this smaller blockage is a place where as large debris become embedded and cause more severe blockage. HDPE pipe is less impaired by flow reduction or pressure loss from the fusion beads than the turbulence in a comparable system made of PVC push joints.


MMI McElroy Fusion Machines

MMI has an extensive history in design and has engineered a wide array of custom machines. Today MMI holds numerous U.S. and foreign patents on fusion related equipment. Industry Leaders in Heat Fusion Equipment.


IPEX Friatec Electrofusion

Unlike competing embedded coil technology fittings which require heating the entire coupling, Friatec's unique "exposed coil" melts the fitting and pipe surfaces directly, sinking into the pipe to form a leak-proof bond. Friatec Electrofusion fittings are designed with extra wide fusion zones that provide greater contact area, further increasing the integrity of the bond between coupling and pipe.


Mustang Squeeze Tools

Mustang designs each of it's tools to an uncompromising design factor of 3 to 1 utilizing lighter weight aluminum where appropriate but high strength steel for the critical stressed components. Mustang is able to focus all it's resources on squeezing pipe in the most efficient and safest manner possible. Mustang offers squeeze tools to accommodate pipe sizes from ½” CTS all the way through to 24” IPS SDR 11.