Mobile Systems | Inventive Marine

By: Inventive Marine  09-12-2011
Keywords: hose

Along with all the unique features of our stationary CanaVac systems, our mobile versions also include:

Heavy Duty Trailer Construction

This dual axle trailer has a frame constructed of 6″, 6000 series marine grade aluminum with multiple cross members to accommodate the 4820 or 4840 CanaVac systems, dewatering box, optional weigh box and all their related equipment. The 16′ x 8′ deck is covered with 1/8″ aluminum non-skid checker plate. Coupling is done by either 2″ ball type hitch or pintle hook.

Lifting Boom

Mounted on the rear corner is a 800 lbs. jib boom, constructed of marine grade aluminum with dual “oil filled nylon” wear bearings. Hydraulic raise and swing (100 degrees) and 7′ reach. Included are 50′ of ¼″ galvanized steel cable with eyelet and lifting shackle. Our boom is rated for 800 lbs. (exclusive use for suction hose only).

Fully wired and “plumbed”

Trailers are fully wired with a 7 pin (round) connector for transport with D.O.T (Canada) regulation lighting which is recessed to prevent damage, and electric (breakaway) brakes on the second axle.

The trailer houses the hydraulic fuel and service water regulator tanks. A diesel driven hydraulic pump (1200–1500 psi) with filter, a 20 GPM service water pump and a 3″ hydraulic driven water pump to flood boat holds via hose or foot valve are included standard items, as well as all applicable hoses and fittings.

Operator Command Center

Houses all the controls necessary for precise hydraulic, engine and pump operation and can facilitate an optional chair and tool box.

Safety Minded

Equipped with engine safety shut down and a safety rail located at the operator station, as well as 4 corner support jacks and 2 in-board tie down straps for stable operation.

Unmatched Industry Warranty

  • 5 years on the main tank
  • 2 years on the valves (inlet/exit and 5-way)
  • 1 year on the power unit.

Keywords: hose

Other products and services from Inventive Marine

09-12-2011

CanaVac Twin Micro | Inventive Marine

Very efficient means of transferring live fish resulting in higher yields in shorter working periods. As with its larger cousin the Aqua, the CanaVac Twin Micro’s key feature is continuous flow. The Twin Micro shares all of the same benefits as the single chamber Micro systems. The Micro will also transfer up to 20 tonnes of post mortem fish per hour. Double power pack units are available for high head installations.


09-12-2011

CanaVac Aqua | Inventive Marine

The CanaVac Aqua was designed specifically as a live fish transfer pump, suitable for all aspects of live fish pumping. Fish can be transferred higher than other fish pumps and with the highest pumping rates ?per H.P. in the world. The interior of the tank is inspected and if necessary, polished to obtain the smoothest possible surface. Pump models can be single chamber, push/pull design or twin cylinder with almost constant flow.


09-12-2011

CanaVac Micro | Inventive Marine

The CanaVac Micro was designed originally for small fish and low volume applications like fish hatcheries. Very efficient means of transferring live fish resulting in higher yields in shorter working periods. Micro has become a very versatile compact system for both the aquaculture and commercial fishery. High volume capabilities guaranteed without scale loss or any other damage to the fish.


09-12-2011

CanaVac Aqua Twin | Inventive Marine

The flow rate of the fish through the hoses and subsequently into the tank is automatically controlled at the proper speed during suction and discharge. The system fills one tank while the other empties ensuring constant flow through the suction and discharge hoses. Fish can be transferred higher than other fish pumps and with the highest pumping rates ?per H.P. in the world.