http://www.gearvalves.com/helical-gear.html

http://www.gearvalves.com/helical-gear.html from DE Mechanical Gears Co., Ltd.

By: DE Mechanical Gears Co., Ltd.  25-09-2014
Keywords: Precision Machining, custom machining, Gear Cutting

It's a industrial gears type and these gears are having angled teeth which creates force on another gear during meshing. Helical gears are fine-tuning in terms of designing so that helical gears work better than spur gears. We can say that edges of helical gears are not similar to the axis of gears rotations. Helical gears are curved in shape and teeth are not parallel to the axis of rotation but set at an angle. The helical gears have cut teeth in a helix and corkscrew in shape. It is used to design the engine to reduce the noise. In helical system, when two systems are engage with each other, the contact starts at one end of the tooth and then gradually spreads as the gears rotate, until the two teeth are in full engagement. This makes helical gears smoothly and quietly. Helical gears make the angles of the gear teeth mounted on perpendicular shafts, adjusting the rotation angle by 90 degrees.

Keywords: custom machining, Gear Cutting, Helical Gear, Helical Gear, China Helical Gears, Precision Machining,

Other products and services from DE Mechanical Gears Co., Ltd.

Involute Spur Gear Ring, M20, Z 78, DIN 8, 45# from DE Mechanical Gears Co., Ltd. thumbnail
18-11-2014

Involute Spur Gear Ring, M20, Z 78, DIN 8, 45#

Our Involute Spur Gear Ring products are 100% and multiple tested to assure high quality.


Eccentric Spur Gear for Punching Machine, 3 Inch from DE Mechanical Gears Co., Ltd. thumbnail
18-11-2014

Eccentric Spur Gear for Punching Machine, 3 Inch

Our Eccentric Spur Gear for Punching Machine products are 100% and multiple tested to assure high quality.


China Spur Gear OEM & Contract Service from DE Mechanical Gears Co., Ltd. thumbnail
25-09-2014

China Spur Gear OEM & Contract Service

Functional Analysis The following application requirements should be considered with the workload and environment of the gear set in mind. • Power, velocity and torque consistency and output peaks of the gear drive so the gear meets mechanical requirements. Spur gears' design constraints limit their ability to transfer energy at high speeds and torques. • Inertia of the gear through acceleration and deceleration. Heavier gears can be harder to stop or reverse. • Precision requirement of gea


Straight Bevel Gears from DE Mechanical Gears Co., Ltd. thumbnail
25-09-2014

Straight Bevel Gears

Bevel Gears are very popular type of gears used in most of the industries, its used for transmitting mechanical power and motion between un similar axes generally at right angles which is effective for working round the corners. We are able to produce straight and spiral bevel gears according to custom requirement. Bevel gears can pass power through shafts at practically any angle and speed. Standard Materials can be MS, Alloy, Steel and Carbon Steel, cast Iron or as required by customer to mak