Seamless Floors | East Coast Coatings

By: East Coast Coatings  09-12-2011
Keywords: epoxy flooring, chemical resistance, High Abrasion

A seamless Floor with a integral cove base is by far, the preferred method for ease of maintenance of floor and highly recommended by environmental health code.

All Integral 100mm or 150mm coved bases are finished with termination strips to create a nice & clean finish.

All systems can be applied with a different degree of Anti-slip finishes.


Troweled Epoxy Quartz System

This troweled system produces an aesthetic and sealed seamless floor composed of multi-colored hard granular aggregates and is finished with a transparent topcoat which is available in gloss, satin and satin non-slip finishes. This system is available in a wide range of colors, patterns, designs and can be applied from 3mm to 6mm depending on your requirements.

Where to Use

  • Grocery store
  • Food packing rooms
  • Commercial kitchens, wet and dry processing areas
  • Health Care facilities
  • Factories
  • Laboratories
  • Locker and shower rooms
  • Correctional facilities
  • and more

Advantages

  • Superior mechanical resistance
  • High abrasion and impact resistance
  • Good chemical resistance
  • Aesthetic finish
  • Durable, impermeable and seamless
  • High density prevents dirt penetration which provides easy cleaning

Troweled Epoxy Flooring (Colored)

This troweled system produces a sealed seamless floor composed of different grades of silica sand aggregates and is finished with a colored topcoat which is available in smooth or non-slip finishes. This system is available in a wide range of colors, patterns, designs and can be applied from 3mm to 6mm depending on your requirements.

Where to Use

  • Animal care facilities
  • Beverage processing
  • Commercial kitchens, wet and dry processing areas
  • Health Care facilities
  • High traffic Aisles
  • Laboratories
  • Locker and shower rooms
  • Production lines
  • Garbage rooms
  • Correctional facilities
  • and more

Advantages

  • Superior mechanical resistance
  • High abrasion and impact resistance
  • Good chemical resistance
  • Aesthetic finish
  • Durable, impermeable and seamless
  • Easily cleaned, maintained

Broadcast Quartz System

This broadcast system produces an aesthetic and sealed seamless floor composed of multi-colored hard granular aggregates. The quartz aggregates used in this system are smaller than the troweled version and provides a textured finish. This system is available in a wide range of colors, patterns, designs and can be applied from 3mm to 5mm depending on your requirements. This system is also finished with a transparent topcoat which is available in gloss or satin finishes.

Where to Use

  • Groceries store
  • Food packing rooms
  • Commercial kitchens
  • Department stores
  • Factories
  • Pharmaceutical laboratories and offices
  • Hospital, laboratories and health care facilities
  • Museums
  • Banks, office buildings and government building
  • and more

Advantages

  • Durable and seamless
  • Impermeable
  • Superior mechanical and chemical resistance
  • Superior aesthetic finish
  • Low maintenance
  • Does not support growth for bacteria or fungus
  • Provides a cleaner, safer and more sanitary work environment

Broadcast Systems (Colored)

This broadcast system produces a sealed seamless floor composed of different grades of Silica Sand aggregates and is finished with a colored topcoat which is available in smooth or non-slip finishes. This system is available in a wide range of colors, patterns, designs and can be applied from 3mm to 5mm depending on the requirements. The Silica aggregates used in this system is smaller than the troweled version and provide a textured finish.

Where to Use

  • Animal care facilities
  • Correctional facilities
  • Corridors and assembly areas
  • Food processing areas
  • Locker and shower rooms
  • Service bays and car washes

Advantages

  • High abrasion and impact resistance
  • Good chemical resistance
  • Improve thermal shock resistance
  • Variety of slip-resistant surface profiles
  • Does not support growth of bacteria
  • Neutral odour

Polyurethane Overlays

Polyurethane Flooring is designed for areas subject to extreme conditions such as continuous spillage or exposure to hot or cold chemicals, transportation on steel wheels, pallet abrasion and combination of chemical and mechanical abrasion. The Polyurethane Floors are recognized for their impact resistance, thermal shock resistance and wear resistance. The systems can vary from 3mm to 9mm depending of the areas. The surface can be from slight to heavy texture depending of your need. A wide range of colours are available.

Where to Use

  • Food processing plants
  • Wet and dry process areas
  • Freezers and coolers
  • Dairies
  • Breweries
  • Wineries
  • Distilleries
  • Laboratories
  • Chemical process plants
  • Pulp and paper plants
  • Warehouses
  • Storage areas

Advantages

  • Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents
  • Excellent resistance to severe weathering, can perform and retain its physical characteristics through a wide temperature range from -37°C (-35°F) to 104°C (220°F)
  • Behaves plastically under impact/deforms but will not crack or debond
  • High abrasion qualities
  • Easily maintained
  • Canadian food inspection agency acceptance for use in food plants
  • Odourless

Keywords: chemical resistance, epoxy flooring, High Abrasion, Seamless Floor,

Contact East Coast Coatings

Email - none provided

Print this page

Other products and services from East Coast Coatings

09-12-2011

Surface Preparation | East Coast Coatings

We use technologically advanced dust-free shot blast equipment, dust-free grinders, scarifiers and scrubbers to prepare your substrate to receive your new flooring system. Shot blasting is a method used on concrete and steel surfaces which prepares the surface for the application of a coating, seamless floor or any type of overlays.


09-12-2011

Sealers, Liquid Hardners & Dustproofers

Sodium silicate based sealers are a propietary blend of Silconate polymers which penetrate concrete surfaces providing an increase in abrasion resistance and a reduction in the surface absorption of liquids. Silane/Siloxane sealers are a deep penetrating liquid designed to protect concrete structures, decks, and surfaces agianst the adverse effects of deicing salts, moisture, weathering and freeze damage.


09-12-2011

Decorative Floors | East Coast Coatings

Designers and builders are drawn to stained concrete because of the unique outcome that can be achieved combining color and application techniques on concrete slabs. Versatile application where we incorporate vinyl flake chips and epoxy to create a decorative floor finish that is easy to clean and is resistant to chemicals.


09-12-2011

Control/Expansion Joint Sealants | East Coast Coatings

Semi-rigid epoxy joint fillers are a two component, self-leveling sealant for load bearing saw cuts or preformed control joints. This system supports the joint edges and reduces spalling of the edges caused by wheel traffic. Semi-rigid to formula that allows for limited temperature and humidity movement of concrete. Concrete construction & control joints. Crack filler repair for old floors.


09-12-2011

Services | East Coast Coatings

Our crews and equipment are fully mobile, allowing us to service you anywhere in Atlantic Canada. Benefit from our outstanding service and long list of comprehensive extras.


09-12-2011

Concrete Repair & Restoration | East Coast Coatings

Fiber-reinforced repair mortars are one component, shrinkage-compensated, superplasticising admixture enhanced with silica fume to offer high strength and superior performance for structural concrete repair. Polyurethanes injection systems are a two component, 100% solid, flexible polyurethane grout used to firmly bond to concrete surface, and will displace and stop water infiltrations.


09-12-2011

Specialty Coatings | East Coast Coatings

The system is applied with a epoxy primer, electrodes made of copper are installed on the edge and between the control joints to insure the conductivity, conductive coat is installed followed by a chemical resistant top coat. A floor can be 100% completed overnight; including all surface preparation and the installation of multiple MMA coats.