Soil Rx utilizes a new approach to solving soil and water hydrocarbon contamination problems. Specifically formulated for safe, effective and environmentally friendly applications, Soil Rx utilizes a blend of activated humic acid, highly concentrated live, hydrocarbon-oxidizing bacteria, and a readily biodegradable natural amino acid complex consisting of a nutrient-rich extract with a broad-spectrum package of identifiable amino acids and other proteins. This triple action product works together synergistically to degrade hydrocarbons with minimal use of equipment, labor and cost. Soil Rx is a low-cost liquid, making it an easy-to-use, cost effective means to eliminate hydrocarbon contamination problems within various types of industry. Soil Rx is an excellent product to remediate hydrocarbons in soil and water. It is effective on gasoline, jet fuels, diesel fuels, grease, tar, motor oils, crude oils, organic solvents, etc.
Soil Rx is a liquid concentrate that must be diluted prior to use. Soil Rx can be sprayed after dilution using standard spray application equipment including but not limited to hand sprayers, mechanical sprayers, water trucks, fire or emergency response equipment, pressure washers, aerial spray equipment, soil injection, well injection, wastewater injection, etc.
Mix and saturate concentrate/water mixture with contaminated soils thor- oughly for maximum performance. For shallow/surface contamination, drench affected areas with enough dilution to fully saturate the soil using normal spray equipment or water trucks. For general contamination less than two feet, contaminated soil may require tilling or excavation to properly mix concentrate/water dilution into soils. For deeper contamination greater than two feet, product application can be applied through boring the area and using perforated piping per regulatory recommendations or excavate the material and treat while land farming or bio-piling.
For contaminated water such as marshes, shorelines and open water with floating hydrocarbons, apply dilution directly to the contaminated areas using appropriate spray equipment or water cannons. For wastewater systems, contact 3 Tier Technologies directly for appropriate treatment methods.
Soil Rx must be diluted using 1 part concentrate to 10 parts clean water prior to use. Product can be diluted up to 100 parts water as directed for specific applications. Application rates are determined by level of contamination, area of application, and speed required for cleanup. Specific application rates are determined prior to sale by the manufacturer and/or distributor.
A normal application rate for contaminated soil is one gallon 10:1 diluted product per cubic yard of soil.
Normal application rate for water applications is three gallons 10:1 diluted product per 1000 square feet of contaminated surface area. Wastewater systems will receive application rates between 5 and 100 PPM of the average GPD or system volume. Applications may be daily, weekly, or monthly.
Soil Rx contains naturally occurring, single-celled, hydrocarbon-oxidizing micro- organisms; a biodegradable natural amino acid complex consisting of a nutrient-rich extract with a broad-spectrum package of identifiable amino acids, coenzymes, and other proteins in a purified, highly active humic acid concentrate.