7730 - Power Grid System - Controller Only

By: MSD Ignition  09-12-2011
Keywords: Programming, Data Acquisition, Ignition

MSD set the standard in programmable ignition systems. In fact, every NHRA Pro Stock championship in the last few years has been with an MSD Programmable 7. Drag radial, twin turbo outlaw cars and 10.5-tire classes all rely on the advanced programming of MSD’s Programmable 7 Ignitions.

 Wait until they see the Power Grid.

 The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing.

 The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products.

 The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units!

 The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware.

Keywords: Data Acquisition, Ignition, Programming

Contact MSD Ignition

Email - none provided

Print this page

Other products and services from MSD Ignition

09-12-2011

Digital 6AL Ignition Control - 6425

The rev limiter was moved right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments. The circuits are updated with efficient components that help the ignition produce more power while drawing less current. The new Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing.


09-12-2011

2-Step Ford 5.0L Mod Motor 2011

This 2-Step connects right to your late model Ford to produce consistent launches and quicker 60-foot times by setting an rpm limit to stage with. When activated, the rpm will be held at a steady rpm and once the green light comes on, release the clutch and take off - but be sure to hold on. The rpm is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments.


09-12-2011

MSD Ignition Products

Our Ignition Controls have defined MSD over the years, but you’ll also find a complete line of Pro-Billet Distributors, a growing line of performance coils, helpful accessories and the best spark plug wires available with our 8.5mm Super Conductors. MSD is the leader in ignition technology and we offer a broad range of products for everything from your daily driven late model to your weekend cruiser or race warrior.