Mitsui Seiki USA - Products - h d

By: Mitsuiseiki  09-12-2011
Keywords: electrical equipment, Floor, table top


Spin Table
MODEL JIDIC H5D WITH FANUC 30iMA
SPECIFICATIONS AND STANDARD FEATURES

MITSUI SEIKI Ultra High Precision - Horizontal Jig Boring Machining Model H5D with 60 station Automatic Tool Changer. Fully closed looped linear scale feed back system and B axis indexing table with 0.0001DEG, FANUC-30iM Numerical control unit, 4 axes controlled with high production capability for drilling, boring, tapping and reaming. High rigid machine bed with T-layout monoblock construction. Spindle head with ceramic ball bearings lubricated by air /oil, is mounted on hand scrapped V-V guide on double column. X and Z slide ways with V/V guides are precisely hand scrapped, and there are precision needle roller bearings in order to avoid stick slip over full travel. This the rigid and stable platform can achieve superior geometrical accuracy with ultra high positioning capability Integrated circuit closed loop complete electrical equipment for operation on 3 phases, 50/60 Hz., 200/220 Volts A.C.

STANDARD FEATURES

Working Capacity
Table longitudinal stroke (X axis) 850 mm (33.5")
Spindle head vertical stroke (Y axis) 700 mm (27.6")
Column travel stroke (Z axis) 750 mm (29.50")
Distance from table surface to spindle axis 150 - 850 mm (5.9" - 33.5")
Distance from spindle nose to table center 150 - 900 mm (5.9" - 35.4")
   
Interference of whole machine cover with work piece on pallet
In machine (at X axis center) 950mm diameter (Ø 37.4")
In two station automatic pallet changer (2 APC) 800mm diameter (Ø 31.5")
Table (Pallet)
Working surface 630 x 630 mm (24.8" x24.8")
B axis infinite table 0.0001°
(360,000 positions)
Table indexing time 6sec. / 90°
Max permissible load on pallet 1,200 kg. (2,600 lb.)
Pallet Surface M16 tapped hole,
24 places,125mm grid hole pattern
(hand scraped finish)
Height from floor to table top 1,365 mm (53.75")
Spindle Head
Spindle taper ISO 7/24(50T)
Rapid traverse
X, Y and Z axes 5,000 mm/min (200 ipm)
B axis (0.001o table) 1,440° / min (4 rpm)
Cutting feed
X, Y and Z axes 0.1~4,000 mm/min (0.004~157 IPM)
B axis 0.1~1,440° / min
Minimum Resolution
X, Y and Z axes 0.0001 mm (0.00001")
B axis 0.0001°
Position Transducer
X, Y & Z axes High resolution 0.1um
Linear scale feedback system
B0.001° table High Precision digital rotary encoder
Automatic tool changer
Tool storage capacity 60 tools
Automatic pallet changer
Number of pallets 2 x (630 x 630mm)
Pallet change method Boxer type installed in front of machine
Power Required
AC 200/220V 3 phase
50/60HZ, 45 KVA
Air Required
0.7 m3/min @ 4kg/cm2
(Dry and clean air)
(60PSI @ 24 cfm)
Machine Dimensions
Length 5,415 mm (214")
Width 3,210mm (127")
Height 3,090mm (122")
Height of table surface from floor 1,365 mm (53.75")
Machine Weight 18,000kg. (40,000 lbs)
Floor space (Includes front APC and maintenance space)
Length 6m (20 ft.)
Width 4m (13 ~14 ft.)
Numerical Control Equipment
FANUC 30iMA
           

Keywords: Automatic Pallet Changer, AUTOMATIC TOOL, Automatic Tool Changer, electrical equipment, Floor, integrated circuit, Jig Boring, Numerical Control, Pallet Changer, Production Capability, Spin Table, Spindle Nose, Table Center, table top,

Other products and services from Mitsuiseiki

09-12-2011

Mitsui Seiki USA - Products - hu a x

Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming. MODEL HU50A-5X WITH FANUC 30iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Production Machining Center Model HU50A-5X with 500mm square pallets. Distance from table center to spindle nose. Spindle head vertical stroke (Y axis).


09-12-2011

Mitsui Seiki USA - Products - vx x

MODEL VX550-5X WITH FANUC 31iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Production Machining Center Model VX550-5X, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC. Table longitudinal travel (X axis.


09-12-2011

Mitsui Seiki USA - Products - vl a

MODEL VL50 WITH FANUC 31iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Precision Mold Center Model VL50, with linear motors and drives, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Distance from spindle nose to table surface Z axis. Minimum Motion command X, Y and Z axes. Feed Rate (X, Y and Z axes.


09-12-2011

Mitsui Seiki USA - Products - vu a sp

MITSUI SEIKI HIGH PRODUCTION VERTICAL MACHINING CENTER MODEL VU65A-SP "SPIN TABLE" WITH FANUC 31iM MITSUI SEIKI High Production Machining Center Model VU65A-SP Numerically Controlled with Standard Equipment and Accessories including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Distance from table top to spindle nose. Table longitudinal stroke (X axis.


09-12-2011

Mitsui Seiki USA - Products - cn ii

MODEL 6CN-II WITH FANUC 30iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Precision Jig Boring Machine Model 6CN-II with Ultra-precision accuracy for operations that demand jig boring tolerances. Max. distance from table surface to grinding spindle nose. Sets Air Cylinders withauto pressure regulators. Cross rail vertical travel with optional ATC. Saddle table transversal travel (Y axis.


09-12-2011

Mitsui Seiki USA - Products - hu a

Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming. 50/60 HZ 45 KVA Note: 75 KVA required if the 12000 RPM spindle is purchased. In two station automatic pallet changer (2 APC. Distance from table surface to spindle axis. Spindle head vertical stroke (Y axis. X, Y and Z axes.