Mitsui Seiki USA - Products - cn ii

By: Mitsuiseiki  09-12-2011
Keywords: electrical equipment, Spindle, integrated circuit


Spin Table
MODEL 6CN-II WITH FANUC 30i
SPECIFICATIONS AND STANDARD FEATURES
MITSUI SEIKI High Precision Jig Boring Machine Model 6CN-II with Ultra-precision accuracy for operations that demand jig boring tolerances. Provided with Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC

MACHINE SPECIFICATIONS

Working Range
Table longitudinal travel (X axis) 1020mm (40")
Saddle table transversal travel ( Y axis) 760mm (30")
Quill vertical travel (Z axis) 300mm (11.81")
Cross rail vertical travel (W axis) 750mm (29.5")
Cross rail vertical travel (W axis) with optional ATC 700mm (27.5")
Distance between columns 1120mm (44")
Max. distance from table surface to grinding spindle nose 950mm (37.5")
Work Table
Work surface 1280 x 960 mm ( 50 x 38")
Nos. of T slots 8 on 106 mm pitch
Rapid feed 5,080 mm/min. (200 ipm)
Fine feed 0.1 - 2,000 mm/min. (80 ipm)
Permissible load table 1200kg (2,700 lb.)
Spindle Saddle
Rapid feed 5,080 mm/min. (200 ipm)
Fine feed 0.1 - 2,000 mm/min. (80 ipm)
Cross Rail
Speed of cross rail elevating 560 mm/min. (22 ipm)
Clamp / unclamp Automatic
Balance 2 Sets Air Cylinders with
auto pressure regulators
Quill
Quill diameter 125mm - 5" ,(145mm - 5.7" at nose)
Rapid feed 3050mm/min (120 ipm)
Cutting feed 0.1 - 2,000 mm/min. (0.004 ~ 80 ipm)
Working Capacity
Drilling capacity 60 mm Ø (2.36" Ø)
Boring capacity 300 mm Ø (11.8" Ø)
Max. face milling cutter diameter 150 mm Ø (5.9" Ø) 
Minimum Resolution of X,Y and Z axies 0.001 mm (0.000039)
Spindle Drive Motor
Spindle Motor Specifications AC 7.5/5.5kw (Cont/30 Min Rating)
(10hp / 7.3hp - Cont. / 30 min)
Power required
Electrical Service Required AC 220 Volt , 3 phase, 80 amp
(60 Hz) 26 KVA
Air required
Air Service Required 6 kg/cm2 (0.59Mpa) or more (90psi)
300NL/min (11 cfm)
Machine dimensions
Length 3,790 mm (150" Approx)
Width 2,700 mm (107" Approx.)
Height Max. (Min.) 3,685 (2,935) mm (145" / 115")
Distance from floor to table surface 940 mm (37")
Weight 9,000 kg 19,800)
Floor Space
(Including peripheral equipment and maintenance area)
Length 5,800mm (19')
Width 5,180mm (17')
Height 4,575mm (15')
CNC Unit
CNC Control Fanuc 30i MA
   
           

Keywords: electrical equipment, integrated circuit, Jig Boring, Spin Table, Spindle, Spindle Nose,

Other products and services from Mitsuiseiki

09-12-2011

Mitsui Seiki USA - Products - hu a x

Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming. MODEL HU50A-5X WITH FANUC 30iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Production Machining Center Model HU50A-5X with 500mm square pallets. Distance from table center to spindle nose. Spindle head vertical stroke (Y axis).


09-12-2011

Mitsui Seiki USA - Products - vx x

MODEL VX550-5X WITH FANUC 31iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Production Machining Center Model VX550-5X, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC. Table longitudinal travel (X axis.


09-12-2011

Mitsui Seiki USA - Products - vl a

MODEL VL50 WITH FANUC 31iSPECIFICATIONS AND STANDARD FEATURES MITSUI SEIKI High Precision Mold Center Model VL50, with linear motors and drives, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Distance from spindle nose to table surface Z axis. Minimum Motion command X, Y and Z axes. Feed Rate (X, Y and Z axes.


09-12-2011

Mitsui Seiki USA - Products - vu a sp

MITSUI SEIKI HIGH PRODUCTION VERTICAL MACHINING CENTER MODEL VU65A-SP "SPIN TABLE" WITH FANUC 31iM MITSUI SEIKI High Production Machining Center Model VU65A-SP Numerically Controlled with Standard Equipment and Accessories including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Distance from table top to spindle nose. Table longitudinal stroke (X axis.


09-12-2011

Mitsui Seiki USA - Products - h d

This the rigid and stable platform can achieve superior geometrical accuracy with ultra high positioning capability Integrated circuit closed loop complete electrical equipment for operation on 3 phases, 50/60 Hz., 200/220 Volts A.C.


09-12-2011

Mitsui Seiki USA - Products - hu a

Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming. 50/60 HZ 45 KVA Note: 75 KVA required if the 12000 RPM spindle is purchased. In two station automatic pallet changer (2 APC. Distance from table surface to spindle axis. Spindle head vertical stroke (Y axis. X, Y and Z axes.