Transmitter Housings : Directional Depot - Melfred Borzall

By: Melfred Borzall  09-12-2011
Keywords: Housing, Transmitter Housings

Side-Load, Bolt-On Transmitter Housings – Designed for DigiTrak Transmitters and Subsite Beacons

Performance Features:

  • Heat-treated, chrome-nickel-moly alloy for superior strength, abrasion resistance and durability
  • New hole-less lids reduces stress concentrations and fracture points in lid
  • Large lid tabs provide more contact surface for less wear and longer life
  • Double locking lid bolts keep the transmitter secure
  • The profiled lid top reduces drag and increases housing life
  • Removable, replaceable tail-piece increases longevity of the housing
  • Use one housing on multiple rigs
  • API thread connections, the most reliable connections on the market
  • Precisely placed slots for optimized signal strength while minimizing weaknesses
For DigiTrak:    

Perfect for Vermeer D7x11, D9x13, D10x15

Perfect for Vermeer D16x20, D18x22, D20x22, D24x26

Perfect for Vermeer D24x40, D33x44, D36x50
For Subsite:    
Perfect for Ditch Witch JT520

Perfect for Ditch Witch JT920, JT920L, JT921, JT922, JT1220, JT2020, JT1720, JT1720 Mach1

Perfect for Ditch Witch JT2720, JT2720 Mach 1, JT3020, JT4020
     

Side-Load, Thread-On Transmitter Housings – Designed for DigiTrak Transmitters and Subsite Beacons

Performance Features:

  • Thread-on Bit Style Housings
  • Heat-treated, chrome-nickel-moly alloy for superior strength, abrasion resistance and durability
  • New hole-less lids reduces stress concentrations and fracture points in lid
  • Large lid tabs provide more contact surface for less wear and longer life
  • Double locking lid bolts keep the transmitter secure
  • The profiled lid top reduces drag and increases housing life
  • Removable, replaceable tail-piece increases longevity of the housing
  • Use one housing on multiple rigs
  • API thread connections, the most reliable connections on the market
  • Precisely placed slots for optimized signal strength while minimizing weaknesses
  • Simple Timing Mechanism on all 3625, 3627, 3632, thread-on style housings
For DigiTrak:    
Perfect for Vermeer D7x11, D9x13, D10x15
Perfect for Vermeer D16x20, D18x22, D20x22, D24x26
Perfect for Vermeer D24x40, D33x44, D36x50

Perfect for Vermeer D50x100, D80x100
   
For Subsite:    
Perfect for JT920, JT920L, JT921, JT922, JT1220, JT1720, JT2020
Perfect for JT2720, JT2720 Mach1, JT3020, JT4020

Perfect for JT7020, JT8020 Mach1

Transmitter Housing Adapters – Designed for all Vermeer® and Ditch Witch® connections

Performance Features:

  • Adapters can be used with Melfred Borzall reamers
  • Extends the life of your ­transmitter housing
  • Don’t throw away your housing just because the threads are worn out
  • Allows different threads to be used on a single housing
Perfect for all Vermeer style connections
Perfect for all DitchWitch style connections

Performance Features:

Perfect for Vermeer Navigator D80x100
Perfect for JT2720, JT 2720 Mach 1, JT3020, JT4020

Keywords: Housing, Transmitter Housings

Other products and services from Melfred Borzall

09-12-2011

Rock Tools : Directional Depot - Melfred Borzall

The hardened steel carbide cutter teeth on the front of the bit are designed to cut through the hardest soils and interchangeable cutter teeth accommodate a wide variety of job conditions. The smooth running Eagle Claw cuts down vibration to the drill-stem and drill rig. The new redesigned Eagle Claw bit is made for hard, rocky soil conditions.


09-12-2011

Bits and Blades : Directional Depot - Melfred Borzall

Excalibur – Available in the following sizes – 2-1/2”, 3-1/2”, 4”, and 5”. Chunky carbide hardfacing the entire length of blade for maximum longevity. Conical carbide cutters make this an aggressive bit for hard soils. Strategically placed carbides along side give this blade a long. Low-profile, tapered design to ­minimize torque stealing drag. One inch thick blades available in 5” and 6” sizes.


09-12-2011

Drive Chucks and Sub-Savers : Directional Depot - Melfred Borzall

Changing out worn sub-savers and drive chucks is an inexpensive and easy way to help get the maximum life out of your drill rod. Direct replacement for the one that came with your JetTrac. CNC Machined to be a perfect match with your drill rod. Completely heat-treated alloy for maximum durability.


09-12-2011

Drill Rod : Directional Depot - Melfred Borzall

Material Selection: Based on ­exhaustive research and years of experience in manufacturing drill rod, Premier Drill Pipe has chosen materials that are best suited for HDD ­applications, all made right here in the USA. Inspection and Quality Control: No other manufacturer does the detailed inspections and quality ­controls that Premier Drill Pipe does.