Compressors - Compressor Room Solutions - Products

By: Skeans  09-12-2011

Rotary Vane

Rotary Vane compressors  are designed for Industrial use in continuous run application environments. Mattie compressors come standard with a 10 year warranty, for a sound(less) investment over the long haul.

MATTEI ERC COMPRESSOR 5-20HP

ERC Series

The ERC series consists of traditional open framed air compressors designed for performance and value. Known for reliability, each compressor features sleek in-line construction, simple controls, quiet dependable operation and low maintenance costs. The ERC series is environmentally friendly as each compressor holds very little lubricant, which saves you on oil changes and disposal costs. The oil filter is cleanable and the highly efficient mechanical air/oil separation chamber delivers high quality air to the separator filter, thus it sees very little lubricant and provides up to 10,000 hours of service with a very low 1-3 ppm oil carryover.

  • 23 to 75 cfm
  • Tank or base mounted
  • 64 dba
  • TEFC Motor standard
  • Aftercooler with 18 F approach temperature
  • Bearingless airends

MATTEI MAXIMA SERIES 40-200HP

MAXIMA

The Maxima Series leverage the superior mechanical efficiencies engineered into Mattei’s rotary vane technology to lower your operating costs, particularly when compared to typical rotary screw air compressors. Featuring quiet cabinet enclosures, electronic controllers, energy saving soft-starting AC inverter drives, premium efficiency TEFC motors, air-cooled after coolers and optional integrated refrigerated air dryers, to deliver unbeatable performance and energy savings across the entire range of variable air demands. The Mattei Maxima unit holds very little lubricant (typically less than half that of a rotary screw air compressor), which saves you on oil changes and disposal costs. The highly efficient mechanical air/oil separation chamber delivers high quality air to the air/oil separator filter thus, it sees very little lubricant and provides up to 10,000 hours of service, and low 1-3 ppm oil carryover.

  • 68 – 1254 SCFM
  • Enclosures Available
  • Slow 1200RPM Airend speed
  • Electronic Controls
  • Reliable, Consistent, Long life

THE MATTEI AC COMPRESSOR 5-60 HP

AC SERIES

The AC Series sets a new standard in air compressors with sophisticated high-efficiency performance, quiet dependable operation and low maintenance. Featuring quiet {as low as 66 dBA} cabinet enclosures, electronic controllers, energy saving soft-start Wye-Delta motor starters, premium efficiency TEFC motors, air-cooled after coolers and optional integrated refrigerated air dryers, to deliver unbeatable performance and energy savings.

  • 15 to 350 SCFM, Cabinet Enclosed
  • “Bearing less” Airends, 10-Year Warranty
  • 1,800 rpm at 66 dBA
  • High Efficiency Totally Enclosed Fan Cooled (TEFC)
  • Simple, Very Quiet, Reliable

Rotary Screw

A rotary screw compressor is a gas compressor which uses a rotary type positive displacement mechanism. They are commonly used to replace piston compressors where large volumes of high pressure air are needed, either for large industrial applications or to operate high-power air tools

Gardner Denver - Rotary Screw Compressor Skeans is the exclusive British Columbia distributor of Gardner Denver Rotary Screw Compressors

GD Rotary Screw 60Hz Compressor Packages

Gardner Denver offers a diverse selection of Rotary Screw compressors that are catered to meet your compressed air needs. In this category Gardner Denver offers it’s Enduro Airends, EnduAir Series, Integra Series, Electra Screw Series, Electra Saver Series and VSD Series.

Please visit the GD website for specific features and benefits to determine which GD Compressor is right for your application. Skeans has up to 50 HP Rotary Screw compressors in stock.

  • 5 to 500 HP
  • Low Noise, Enclosure Available
  • Slow Speed Operation on select models
  • 20 to 2580 CFM
  • Up to 200 psig on select models
  • Direct Drive on select models

QNW Rotary Screw

QUINCY NORTHWEST (QNW) G- Series Rotary Screw

G Series is a state-of-the-art, single-stage, lubricant-injected, rotary screw air compressor assembly with the Graphic Operator Access Terminal (GOAT). The GOAT is a microprocessor control designed to monitor, regulate and protect the compressor. Sensors continuously transmit temperature and pressure information to the processor. This data allows the most efficient compressor operation, annunciation of proper service intervals and alarms, and initiates shut down due to abnormal operating conditions.

  • 40 – 350 hp
  • Lubricated Injected
  • Up to 210 psig
  • Direct Drive, 1800 rpm, Long Life
  • 186 – 1521 cfm
  • Single Stage
  • Open Frame, Simple Construction

Reciprocating

Reciprocating compressors are prime examples of Gardner Denver’s commitment to quality and excellence. Skeans offers a wide range of Gardner Denver Reciprocating Compressors including Lubricated, Air Drilling, CNG, Breathing Air, and Belliss & Morcom

GD Reciprocating Air-Cooled Air Compressors

R-Series - Splash Lubricated

Gardner Denver R-Series Compressors are loaded with features designed for day-in, day-out performance. This compressor pump comes with a 5-year pro-rated warranty. As a result, R-series compressors offer long, trouble-free service with unbridled operating efficiency.

  • 1/2 – 35 HP
  • Tank or base mounted, simplex or duplex models
  • Gas engine drive models available
  • 5.3 - 202 CFM at 175 PSIG on electric driven units
  • Factory filled with AEON long life Lubricant

GD Reciprocating Pressure Lubricated

PL-Series

The PL-Series compressor has been designed to operate in extreme duty applications and is a pressure-lubricated alternative to the R-Series unit. Because the PL-Series can operate up to 250 psig in remote locations or in off-level operations, it is a true industrial use compressor. The PL-Series features domed pistons, integral cylinder head, disc valves and an oil pump that provides lubricant to all crucial parts of the compressor

  • 3 – 35 HP
  • Up to 250 PSIG
  • Simplex, Duplex and gas Engine Driven
  • 9.7 - 202 CFM at 175 PSIG on Electric Driven units
  • Tank or Base Mounted
  • Two-Stage pressure lubricated pumps
  • Load less auto stop/start

Variable speed compressors benefit the user by reducing power costs, reducing power surges and delivering more constant pressure

GD Variable Speed

VS, VST & EnviroAire Series

Gardner Denver offers variable speed compressor solutions that produce a wide turndown range. Coupled with high efficiency and reliability these compressors provide flexible solutions with various feature and control options. See the Gardner Denver VS Series, VST Series, and the EnviroAire Series

  • Up to 2032 cfm
  • Single or Two Stage
  • Wide Turndown Range
  • 11–260kW (15-350 hp)
  • Up to 80 dBA
  • Air Smart Controller
  • Direct Drive

MATTEI VSD 11kw-200kw

Optima Series

The OPTIMA Series leverages the superior mechanical efficiencies engineered into Mattei’s rotary vane technology to lower your operating costs, particularly when compared to typical rotary screw air compressors. Benefit from sophisticated high-efficiency performance, quiet dependable operation and low maintenance. Featuring quiet (as low as 65 dBA) cabinet enclosures, electronic controllers, energy saving soft-starting AC inverter drives, premium efficiency TEFC motors, air-cooled aftercoolers and optional integrated refrigerated air dryers, to deliver unbeatable performance and energy savings across the entire range of variable air demands

  • 42 - 582 SCFM
  • Cabinet Enclosed

QNW Variable Speed

V- Series

The QNW V Series is a variable speed, single stage, lubricant injected, rotary screw air compressor. The compressor assembly is designed to maximize part-load system efficiency. The V Series combines reliable full-load performance with efficient part-load variable speed controls

  • 50 - 300 HP
  • 34 - 1602 ACFM
  • Single Stage
  • Lubricated Injected
  • 100 - 150 PSIG
  • Open Frame, simple contruction

Oil Free

When Oil Free air is required in your lab, medical facility or food manufacturers plant, Skeans has several compressors to choose from in traditional reciprocating and variable speed units

Gardner Denver Oil Free/Oil Less Compressors

PureAir Series

Gardner Denver’s PureAir is changing the way the world uses oil-free compressed air. The unique design of the PureAir Series assures the long life and productivity. Internal moving parts in the PureAir Oil-Less design are protected from wear without conventional lubrication. The result is low maintenance, high durability and pure, oil-less air! This includes the PureAir and the PureAir II Series

  • 3/4 - 15 hp
  • Duplex, Triplex, and Quad packages
  • Up to 175 PSIG
  • 1.7 – 138 acfm
  • Single & Two Stage, Air or Water Cooled
  • Meets NFPA99 requirements