High Flux Cores | Magnetics

By: Mag Inc  09-12-2011

High Flux cores offer the highest biasing capability of all powder core materials. The high saturation flux density (15,000 gauss) and relatively low losses of High Flux cores make them quite useful for applications involving high power, high DC bias, or high AC bias at high power frequencies such as Switching Regulator Inductors, In-Line Noise Filters, Flyback Transformers, Power Factor Correction (PFC), and Pulse Transformers.

including: applications, advantages of High Flux cores versus Powdered Iron cores, Silicon Iron laminations, and  Ferrites. 
View including; Normal Magnetization curves, Core Loss Density curves, Permeability versus Temperature curves, Permeability versus DC Bias curves, Permeability versus AC Flux, and Permeability versus Frequency curves. 

Contact Mag Inc

Email - none provided

Print this page

Other products and services from Mag Inc


Powder (Sendust) Cores,Ferrite Cores,Strip Wound Cores

Line includes tape cores, and bobbin cores made from high permeability thin strip alloys of nickel-iron or grain oriented silicon iron. Alloy 48, Square Permalloy 80, Supermalloy and Magnesil. More commonly referred to as Tape Wound Cores. These alloys are known as Orthonol.


Powder Cores - Kool Mu,MPP,High Flux and XFlux Powder Cores

Magnetics® Powder Core products, Kool Mu®, MPP, High Flux and XFLUX® materials, are distributed air gap cores that are primarily used in power inductor applications, specifically in switched-mode power supply output filters, also known as DC inductors. Notable characteristics of Magnetics’ Powder Core materials are high resistivity, low hysteresis and eddy current losses and excellent inductance stability under both DC and AC conditions.


Kool Mu Cores | Magnetics

Kool Mµ® material’s low loss and relatively high saturation level make it excellent for use in power factor correction circuits as well as unidirectional drive applications such as Pulse Transformers and Flyback Transformers. The near zero magnetostriction makes Kool Mµ ideal for eliminating audible frequency noise in In-Line Noise Filters and Inductors.


MPP Cores | Magnetics

MPP cores possess many outstanding magnetic characteristics, such as high resistivity, low hysteresis and eddy current losses, excellent inductance stability after high DC magnetization or under high DC bias conditions and minimal inductance shift up to 2000 gauss under AC conditions.