Simulation Training - Web Tutorials

By: Macse  09-12-2011
Keywords: Process Simulation, Simulation Training, Web Tutorials

Simulation training on Hysys, Unisim Design, ShadowPlant or Unisim Operation Suite can be done at YOUR office. We can provide training material and training exercises matching YOUR needs, not just generic content.

MACSE now offers web tutorials (training videos) for process simulation training using HYSYS, UniSim Design, Unisim Operations or ShadowPlant

We can also create specific web tutorials based on YOUR training objectives (steady state mode, dynamic simulation).


- Get Started

- How to build distillation towers (in steady state mode)

- Basic course (Steady State mode)

- Basic course (DYNAMICS mode)

- Other subjects available on demand


- Overview of Unisim Operation tools

- Basic course on Unisim Operations

- Other subjects available on demand

Training can also be available in spanish, portuguese and french.

Keywords: Process Simulation, Simulation Training, Web Tutorials

Other products and services from Macse


Extension and Development of Custom Unit Operations

Simulation software offers a wide variety of unit operations, and by combining basic units together you can build a more complex unit that can be re-used as a template. Still you may face situations where you need to use in-house model and integrate it into your simulation model. Extension to protect intellectual property of Hysys (or Unisim Design) in spreadsheet blocks. Extension to convert a Unisim Design case to a PRO/II case.


Dynamic Relief Valve Sizing

This is mainly due to the fact that conventional calculations methods are very conservative, to poor estimation of relieve properties and because transient effects are not considered. Many studies have shown that, in most cases, conventional methods were highly over-estimating relieving flows compared to dynamic methods.


Steady State Studies

Process engineers are frequently involved on field surveys and are sometimes confronted to apparent contradictions between field data and Historian/DCS data. These studies can be done using your models or we can build new models with Hysys, Unisim Design or any other simulation software available in the market.


Process and Control Validation

For units with a lot of heat integration between the preheat section and the separation section, process designers can under-estimate the heat capacity of a furnace during start-up making the steady state almost unachievable. Instead of using only rules of thumb to develop control strategies, a control engineer can easily evaluate, test and tune a control strategy.


Operator Training Simulators (OTS

We help companies to develop their operator training simulator using the tools available on the market or using their own modelling tools. Our engineering team works with the most effective and reliable operator training simulators tools in the market. The operator training simulator softwares commonly used are UniSim® Operations Suite, ShadowPlant and HYSYS®. Validation of new control startegies or multivariable control applications.


Dynamic studies using Hysys, Unisim Design, Unisim Operaions

These studies can be done using your models or we can build new models with Hysys, Unisim Design, Unisim Operations or any other simulation software available in the market. These studies are used to avoid plant tests, to verify different operating scenarios, to compare different process designs or control strategies. One example that recently came to us was to develop a dynamic simulation for a Steam Generation Plant.