MACO Industries

By: Maco Industries  09-12-2011
Keywords: motor

PRODUCTS

2-Side Chipping Edger

  • Feed speed 150 FPM to 400 FPM
  • Chip length: ½” to 7/8”
  • Set works included: 4” to 12”
  • Motor hp range: 75 -100 hp

4-Side Cant Machine

  • Chip length 5/8” to 1”
  • Log Dia.: 12” max
  • Cant: 3”-10”
  • Motor hp range: 75-150 hp

2-Side Cant Machine

  • Chip length 5/8” to 1”
  • Log Dia.: 12” max
  • Cant: 3”-10”
  • Motor hp range: 75-150 hp

4-6 Double Vertical Gang Saw

  • Feed speed: Up to 270 FPM
  • Cuts: 150 to 160 Kerf
  • Capability: One 6 x 6 into three 1 ¾ x 6 or 1 4 x 4 into two 1 ¾” x 1 ¾”
  • Motor hp range: 100-150 hp

Splitter Saws

  • Custom Design tailored to Customer Requirements
  • Knurled Feed Rolls
  • Precision Ground Saws for Smooth Finish

Two Saw Edger with Reman

  • Feed Speed: 350 FPM
  • Max input dimensions: 4”thk x 24” wide
  • Finished Saw Cut: 2”, 4”, 6”, 8”, 10”, 12”
  • Feed Works: Powered with Two 7 ½ hp Drives
  • Saws: Powered with two 75 hp TEFC Motors
  • Cutter Head: Powered with 100 hp TEFC Motor

In-feed Decks for Logs, Cants, & Slabs

  • Lengths to Suit the Operation
  • Speeds: Constant or Variable Speed to match
  • Can be equipped with Line Bar, Jump Chain and Board Turner
  • Complete with rolls, roller bearings, chain drives and cylinders

Top Saw Edger

  • Feed Speed: 300 FPM
  • Max Size Material input: 4” thk. X 24” W.
  • Finished Saw Cut: 2”, 4”, 6”, 8”, 10”, 12”
  • Feed Works: Powered with Two 5 hp Drives
  • Saw: Powered with two 75 hp TEFC Motors
  • Top Feed: 10” dia. Machined Tooth Rolls
  • Bottom Feed: Sharp Chain with Side Guides

MACO Stud Machine

  • Feed Speed: 130 FPM
  • Log Size: 4”x 11” max.
  • Finished Cant: 4”x 8” max 2”x 8”min.
  • Hydraulically operated adjustments to infeed chain height
  • Overhead Rollers Raised and Lowered with Air Cylinders, 5hp
  • Two Vertical Infeed Roll Assemblies
  • Bottom Segment Heads w/Profile Driven by 75 hp TEFC Motors and Mounted on Spherical Roller Bearings.

Stick Breaker

  • Designed to break Single or Multiple Numbers of Stacking Sticks
  • Capable of Breaking 2x4’s into pieces varying from 1” to 3” long.
  • Capacity: 3 tons/day
  • Motor: 5 hp TEFC

Slabbing Edger

  • Feed Speed: 150 FPM
  • Chip Length: ½” to 7/8”
  • Setworks included: 1”, 2”, and 10” opening for Knife Changing
  • Motor Size Range: 100 to 250 hp
  • Other Features per your Specifications

Unscramblers

  • Five Chain Sections to Effectively Sort Lumber
  • TEFC Motor Drive
  • Structural Steel Frame
  • Heavy duty Chain Drive and Roller Bearings

Jump Chain and Board Turner

  • Works on In-Feed Decks to Route the Lumber in Different Directions

Sharp Chain Turner System

  • Log Turner
  • Thumper Rolls
  • Belt Conveyor
  • Drives with Hydraulic Motors
  • Hydraulic Power Unit

Log Turner—Model 80-001

  • Designed to Turn a Log as it Moves Down a Conveyor—Turns in One direction to position for cutting
  • Fabricated Steel Structures w/6” O.D. Turning Cylinders.
  • 70” high x 63” W. x 26” dp.
  • Log Sizes: 6” Dia. min to 18” Dia. max.x 20 Ft
  • Hydraulically Driven

Log Turner—Model 3-014

  • Centers a log onto Sharp Chain or Carriage
  • Rotates Log into Position for Maximum Yield.
  • Hydraulically Driven

Keywords: motor

Contact Maco Industries

Email - none provided

Print this page